Shop-Vac 9627006 10 Gallon 4.5 Peak HP Polyethylene Wet / Dry Vacuum with Tool Kit

Description

Small shop vacuums tip over and spill collected wastewater when operators pull hoses across rough jobsite expansion joints. The Shop-Vac 9627006 10 Gallon 4.5 Peak HP Polyethylene Wet / Dry Vacuum with Tool Kit features a stable caster base that resists tipping during fast cleanups. It carries 10 Gallons under 4.5 peak HP. Liquid volume capacity requires periodic tank emptying.

The recovery canister uses thick injection-molded structural polyethylene that flexes under heavy jobsite impacts without cracking. A high-output 4.5 peak Horsepower motor features heavy copper field windings and an efficient single-stage impeller to maximize air velocity. Four swiveling caster wheels snap into molded outrigger feet that provide roll stability across rough jobsite debris.

Mid Size Construction Cleanup Hardware Matrix

High motor horsepower pulls dense construction debris, sawdust, and spilled water through an extra-wide hose without clogging. The integrated rear blower port clears debris from workbenches and truck beds.

• 10 Gallon structural polyethylene canister withstands jobsite impacts and heavy tool drops.
• 4.5 peak Horsepower motor generates high-velocity suction to pull gravel, drywall chunks, and water.
• Wide outrigger caster feet provide exceptional rolling stability across rough subfloor surfaces.
• Built-in tank drain plug allows operators to dump liquid waste without lifting heavy tanks.
• Rear blower port converts the vacuum into a powerful directional blower to clear shop benches.
• Lock-on hose connection prevents the vacuum hose from pulling free when dragged across rooms.
• Included cartridge filter captures fine dust down to 1 micron during dry commercial shop cleanups.

Motor Suction Load Bench Telemetry

Pulling continuous dry construction debris draws 9.2 Amps from a standard 120 Volt circuit under steady load. Motor housing surface temperature stabilizes at 128°F after 40 minutes of uninterrupted construction cleanup. The vacuum motor produces 65 inches of waterlift suction at 95 CFM airflow. Operating acoustic sound output measures 74 dBA measured five feet away.

Commercial Construction Maintenance Directives

Drywall contractors, commercial remodelers, and woodworking shops clear heavy renovation debris fast with this poly vacuum. Do not vacuum fine crystalline silica dust without installing an OSHA-compliant high-efficiency cartridge filter. Never use this vacuum without the internal foam sleeve during liquid spill extraction.

• Tap drywall dust out of the pleated cartridge filter over a waste bin after every work shift.
• Rinse the poly tank with water and air-dry after recovering muddy water or drywall paste.
• Inspect the lock-on hose collar for cracked locking tabs every 30 days of jobsite service.

Equipment Guarantee Commercial Delivery Manifest

Shop-Vac covers this commercial wet dry vacuum with a 1-Year commercial warranty covering the motor, poly tank, and switch. The shipment arrives with the 10 Gallon vacuum, 7-foot lock-on hose, two extension wands, floor nozzle, utility nozzle, crevice tool, and cartridge filter.