ProTeam GoFit 6 PLUS 107707 6 Qt. Backpack Vacuum with 107530 ProBlade Carpet Floor Kit – 120V

Description

Narrow floor tools force janitors to make excessive cleaning passes across large commercial suites. The ProTeam GoFit 6 PLUS 107707 backpack vacuum maximizes cleaning efficiency by uniting an indexed quick-adjust harness with an aerodynamic ProBlade carpet floor tool. It pulls 153 CFM airflow and 91 inches of static water lift. Operators who suck up large wood chips will jam the wand entry.

The canister shell uses high-impact polyethylene resin that flexes during door frame collisions to prevent structural cracking. An 8.5 Amp single-stage flow-through motor features precision-ground rotor shafts supported by dual sealed ball bearings. Stamped alloy suction impellers produce high static vacuum across multi-stage filtration chambers. Clean air bypass paths isolate electrical motor windings from heat buildup, venting air downward through acoustic baffles that minimize operating sound.

Hardware Matrix Operational Specs

The ProBlade carpet floor tool features an internal airflow distribution manifold that maintains uniform suction across the full shoe width. The indexed PLUS harness enables fast torso adjustments between multiple shift workers.

• 14-inch ProBlade carpet tool distributes suction across the entire head width for deep grit removal.
• Straight aluminum wand couples firmly with ProBlade tools to eliminate air bypass leaks under load.
• Indexed four-point harness system uses numbered adjustment straps for instant custom fitting.
• 6-quart dry collection chamber traps commercial sweepings without restricting motor intake velocity.
• 50-foot heavy-duty power cable eliminates repetitive outlet moves in long commercial corridors.
• 4-level filtration circuit retains 99.97 percent of dust particles down to 0.3 microns.
• 1.5-inch crush-proof vacuum hose flexes without kinking under rapid directional turns.

Dyno Thermal Bench Benchmarks

A test bench shows the 120-volt motor pulls 8.4 Amps under working tool resistance. Impeller speed holds stable at 22400 RPM under operational floor tool drag. Sump casing surface temperature climbs 47 degrees Fahrenheit above ambient room baseline after 60 minutes of nonstop operation. Suction pressure measures 90.5 inches of static lift with clean filters and drops to 79 inches when filled to capacity. Sound pressure meters at 67.1 dBA at ear level. Internal thermal protection cuts power at 208 degrees Fahrenheit during prolonged airflow blockages.

Field Maintenance Trade Offs

The ProBlade carpet tool relies on clean bottom shoes to maintain suction velocity across carpet pile. Do not deploy this vacuum in commercial kitchens with wet grease spills because moisture will burn out the flow-through motor in seconds. The 6-quart volume requires frequent dumping during heavy autumn leaf cleanouts.

• Clear lint and hair accumulation from the ProBlade shoe orifice after every shift.
• Wash the micro cloth filter by hand every 30 days and air-dry until bone dry.
• Verify power cable jacket integrity to identify copper exposure before cord damage worsens.

Factory Warranty Unboxing Manifest

ProTeam backs this system with a 3-Year commercial motor warranty and provides a lifetime warranty on molded chassis components. The package includes the 6-quart PLUS vacuum unit, straight wand, ProBlade carpet tool, 17-inch crevice tool, 3-inch dust brush, 5-inch upholstery tool, 50-foot cord, and two filter bags.