Milwaukee M18 FUEL 9 Gallon Dual Battery Dust Extractor w/ PACKOUT Compatibility and VACLINK Kit

Description

A 36V brushless motor moving 150 CFM defines the Milwaukee M18 FUEL Extractor Kit 0888-22HD. Designed for silica compliance during concrete cutting and drilling, this 9-Gallon machine uses dual M18 REDLITHIUM batteries for cordless operation. The auto-cleaning HEPA mechanism cycles every 21 seconds, though dual HD12.0 battery packs add 6.8 lbs to the upper power head.

Reinforced high-density polypropylene shapes the lower tub, mounted to a steel-axle rolling cart with 4 non-marking casters. The POWERSTATE brushless motor pulls 36V from dual 18V battery ports, generating 97in of static water lift. Machine base dimensions measure 22in long by 16in wide with a 24in overall height. Tool weight sits at 31 lbs bare and 37.8 lbs with dual HD12.0 batteries installed, rolling over jobsite cords.

Key Features of Milwaukee 0888-22HD

Concrete cutters and commercial remodelers choose to buy Milwaukee 0888-22HD kits when evaluating competitive commercial pricing on cordless dust extraction platforms. This system cleans active masonry jobs, tuckpoint grinding operations, and core drilling stations without tripping branch circuits.

• Dual-battery terminal draws power from 2 18V packs in series to drive a high-output 36V motor.
• Automatic filter cleaning cycles every 21 seconds to maintain 150 CFM airflow in silica dust.
• Certified HEPA filtration captures 99.97 percent of microfine particles down to 0.3 microns.
• VACLINK wireless remote module starts extractor airflow with the trigger pull of paired cordless tools.
• Integrated PACKOUT cleats allow tool boxes, organizers, and storage bins to latch onto the vacuum top.
• Water shut-off float valve blocks suction port when wastewater fills the canister to wet capacity.
• Crush-resistant 9ft anti-static hose prevents static shock discharges when vacuuming dry concrete fines.

Dual Battery Static Airflow Benchmarks

Laboratory bench checks recorded 97in of static water column lift and 150 CFM unrestricted air volume. Sound emissions registered 72 dB at 4ft under full load. Running on dual M18 HD12.0Ah battery packs, the extractor sustained 36 minutes of continuous concrete grinding collection before low-voltage cut-off. Internal pack temperatures peaked at 124°F in 75°F ambient shop air. The pulsed filter cleaning valve generated 2.1 PSI reverse air spikes, sustaining line suction above 135 CFM through a full 9-gallon tub.

Cordless Extraction Routine Care Protocol

Latching PACKOUT storage boxes onto the motor lid requires 10 lbs downward force until spring cleats lock. Do not use this cordless unit for hot ash chimney recovery, ungrounded solvent pickup, or stationary central shop duct systems.

• Inspect dual flat pleated HEPA filters for pinhole tears or seal damage every 40 operational hours.
• Blow dry debris from battery terminal slides using compressed air under 30 PSI every 15 days.
• Wash the internal float valve cage and liquid tank walls with clean water every 30 days.

Milwaukee Warranty Kit Crate Contents

Milwaukee protects this tool with a 3-Year warranty and the battery packs with a 3-Year warranty. The kit carton contains the 0888-20 extractor, 2 M18 HD12.0 batteries, an M18 dual-bay rapid charger, a 9ft anti-static hose, VACLINK remote module, 1 HEPA filter, and instruction manuals.