Greenlee Digital Voltage Indicator with Test Point 100kV, OH/UG Kit 2

Description

Verify line potential on both overhead distribution conductors and capacitive test points of underground elbow connectors with a single rugged instrument. The Greenlee DVI-100T Digital Voltage Indicator reads voltages from one hundred volts up to one hundred kilovolts before line crews install protective grounds. Linemen confirm zero energy inside padmount gear without carrying separate test-point meters. The tool mandates hot-stick handling to satisfy OSHA dielectric clearance distances.

Heavy filament-wound fiberglass forms the outer dielectric probe mast, stopping electrical tracking and withstanding rough utility bucket handling. An internal dual-circuit resistor divider scales both raw transmission voltages and low-voltage elbow capacitive signals into micro-volt inputs for the processor. Operating on one standard 9V alkaline battery, the circuit draws four milliamps during line testing. The assembled indicator weighs 3.4 lbs and measures thirty-six inches in length, featuring an integral universal hot-stick spline.

Dielectric Precision Bench Calibration Limits

High-voltage laboratory testing proves measurement accuracy within three percent of reading from 4kV up to 100kV line-to-ground potentials. The dedicated capacitive test point mode scales low-voltage signals from elbow test points accurately, reading direct kilovolt equivalence without tripping false dead-line alarms. Temperature chamber testing between minus twenty degrees and one hundred twenty degrees Fahrenheit proves display stability within 1.5 percent. When testing near ungrounded parallel phases, the meter rejects induced fields, displaying true conductor potential upon physical contact.

Key Features of Greenlee DVI-100T

Utility line crews buy Greenlee DVI-100T Digital Voltage Indicator kits to service overhead three-phase distribution lines and underground padmount enclosures. Compare commercial high voltage indicator pricing to equip your utility service fleet.

• Dual operating modes measure direct line voltage up to 100kV and capacitive test points cleanly.
• Dual high-contrast LED displays face downward to give clear readouts from bucket trucks or ground level.
• Audible alert horn sounds immediately upon detecting line voltage to back up digital visual readouts.
• Underground bushing probe adapter penetrates deadbreak and loadbreak elbow test ports squarely.
• Universal spline fitting locks securely onto standard fiberglass shotgun sticks for elevated reach.
• Auto-shutoff circuit preserves nine-volt battery reserves when line crews stow tools in truck bins.

Substation Lineman Negative Selection Filter

The stepped selector knob turns with positive clicks through heavy Class 4 rubber lineman gloves. Do not purchase this overhead and underground kit for transmission systems exceeding 100kV line-to-ground or low-voltage control panel troubleshooting below one hundred volts. Routine maintenance requires wiping the fiberglass dielectric tube with silicone hot-stick wipes before elevating, testing battery condition monthly, and sending the unit to a certified laboratory for annual dielectric testing.

Factory Warranty Crate Manifest

Greenlee covers this voltage indicator with a 1-Year manufacturer warranty against material defects and electronic component failures. The complete Kit 2 package includes the DVI-100T indicator, overhead hook probe, underground bushing probe, universal hot-stick spline adapter, nine-volt battery, and rugged molded plastic carrying case.