Greenlee Pipe and Conduit Rack

Description

Organize conduit bundles on active construction slabs with the Greenlee 668 Conduit Storage Rack mobile storage tree. Built for commercial electrical contractors, this rolling rack holds 1,000 lbs of pipe, conduit, and strut channel. Seven storage tiers separate conduit sizes. Tight turns in narrow corridors require slow movement due to 10ft pipe overhang.

Welded ASTM A36 structural steel builds the vertical A-frame chassis, reinforced with structural base gussets. 7 pairs of angled steel arms hold conduit sizes from 1/2in to 4in diameter, bearing 1,000 lbs total capacity. 4 heavy 6in polyurethane casters include dual wheel and swivel brakes. Unboxed tool weight measures 110 lbs, with storage stance measuring 58in long by 34in wide by 62in high inside storage corrals.

Key Features of Greenlee 668

Contractors buy Greenlee 668 storage racks to prevent jobsite pipe piles from creating tripping hazards on commercial decks. Direct pricing provides heavy-duty mobile conduit storage that keeps trade materials sorted right next to pipe benders.

• Welded A-frame steel construction carries up to 1,000 lbs of conduit and strut.
• 7 tiered storage arm pairs organize distinct pipe diameters from 1/2in to 4in.
• Upward angled cradle arms stop round pipe bundles from rolling off the rack.
• 4 6in heavy-duty polyurethane casters roll over rough slab debris and threshold plates.
• Dual caster foot brakes lock both roll and swivel motion on uneven floors.
• Open frame layout allows fast side-loading of 10ft and 20ft conduit lengths.
• Slim 34in wide base passes through standard commercial 36in doorway openings.
• Industrial green powder coat protects steel framework from jobsite moisture and concrete dust.

Tier Arm Load Benchmark

Static load testing verifies each pair of angled steel arms withstands 250 lbs of pipe weight without cantilever bend or weld stress cracking. The main A-frame spine sustains 1,000 lbs of total distributed conduit load without vertical frame deflection. 6in caster bearings roll against 28 lbs of push force across smooth concrete under full rated payload. Dual caster locking brakes hold the rack secure on 5-degree floor slopes. Industrial powder coating resists 500 hours of salt fog exposure without flaking.

Jobsite Slab Usability Bounds

Pushing the fully loaded 1,000 lbs conduit rack across broom-finished concrete requires 32 lbs of sustained push effort by 1 worker. Do not load all heavy conduit bundles on 1 side of the rack because asymmetric weight distribution creates dangerous tip-over hazards on uneven slabs.

• Inspect tiered arm welds and base frame gussets for stress cracks every 60 days.
• Grease caster swivel bearings and axle spindles using NLGI 2 grease every 90 days.
• Check caster brake engagement pads and adjust locking nut tension every 30 days.

Factory Warranty Crate Manifest

Greenlee covers the 668 conduit rack with a 1-Year commercial warranty against material defects and craftsmanship failures. The shipping crate holds the welded A-frame chassis, 7 pairs of storage arms, 4 6in polyurethane casters, mounting hardware, and comprehensive assembly instructions.