RIKON 18 In. Professional Bandsaw 4.0 HP

Description

Severe blade wander and frame deflection ruin thick hardwood flitches when resawing wide timber on light hobby bandsaws. The RIKON 18 In. Professional Bandsaw delivers heavy resaw capacity through a four-horsepower motor and nineteen-inch resaw throat. The eight-hundred-pound welded steel frame requires machinery skates or dedicated floor anchor pads to maneuver across concrete workshop floors.

A heavy structural steel frame holds high beam tension across wide carbide resaw bands without frame twisting under load. The four-horsepower induction motor connects to balanced cast iron band wheels via an industrial poly-v drive belt, storing rotational inertia to power through dense knots. Tool-less ball bearing blade guides support the blade above and below the precision-ground cast iron table, providing extreme wear resistance without heating the steel band.

Professional Resaw Bandsaw Hardware Parameters

Custom millwork plants demand extreme blade tension to produce paper-thin veneers without blade washboarding or thickness taper. Heavy ground cast tables support dense timber flitches without flexing under feed pressure.

• 4 HP single-phase motor operates on 230-volt shop power to provide non-stall resawing torque
• 18-inch throat capacity and nineteen inches of resaw height accommodate massive hardwood timber slabs
• Computer-balanced cast iron wheels store heavy rotational inertia to maintain constant band velocity
• Tool-less ball bearing blade guide units control blade deflection both above and below the table
• Ground cast iron table tilts 45 degrees right and 5 degrees left on heavy machined trunnion mounts
• Cast iron resaw fence includes an adjustable high-profile aluminum face plate to support tall timbers
• Foot-activated mechanical disc brake halts spinning band wheels within seconds for operator safety

Bench Load Telemetry Amperage Draw

At idle the motor pulls 6.8 amps across 230-volt line feeds. Resawing sixteen-inch wide kiln-dried hard maple using a 1.25-inch carbide band pushes current draw to 18.4 amps while band velocity holds steady. Band deflection measures under 0.001 inches across an eight-foot board pass under full tension. Acoustic output registers at 76 dBA under full resaw load, maintaining manageable shop noise.

Field Service Trade-Offs Application Filter

Do not install this machine on undersized wiring runs to avoid severe line voltage drops under heavy resawing loads. Operators who leave wide resaw bands under high tension overnight flatten the polyurethane wheel tires and warp steel bands. Release blade tension using the quick-release lever at the end of each work shift. Clean tree pitch off the guide bearings using mineral spirits once each week. Inspect wheel brush bristles to ensure chip clearing from drive tires.

Warranty Protection Standard Package Items

A 5-Year limited warranty protects the bandsaw chassis, motor, and cast iron wheels against manufacturing flaws. The delivery crate contains the bandsaw chassis, ground cast iron table, high-profile resaw fence, ball bearing guide blocks, foot brake unit, and service tool set.