RIKON 14 inch Deluxe Band Saw with Drift Fence 1.75 HP

Description

Blade drift during resaw operations ruins expensive timber stock through uncontrolled blade deflection. The RIKON 14 inch Deluxe Band Saw provides rigid resaw capability with a 1.75-horsepower enclosed induction motor running at 2950 feet per minute blade speed. This floor-standing shop bandsaw requires accurate blade tension calibration and will stall under aggressive manual feed rates on dense 12-inch exotic hardwood burls.

The backbone features a heavy welded steel plate column structure engineered to resist frame flex under high blade tension loads. Balanced cast iron band wheels house sealed ball bearings and thick rubber tires to suppress rotational resonance at high speeds. Spring-loaded tool-less blade guides utilize heat-resistant ball bearings that support 1/8-inch to 3/4-inch band saw blades without friction welding. A rack-and-pinion cast iron guide post maintains vertical tracking accuracy across varying workpiece thicknesses.

Band Saw Hardware Specifications

A 13-inch resaw capacity accommodates wide book-matching cuts through solid timber slabs without column interference. The heavy cast iron work table tilts forty-five degrees for complex bevel work.

• 1.75-horsepower 115/230-volt motor drives band speeds at 2950 or 1445 surface feet per minute
• Heavy 14-inch cast iron dynamic wheels deliver high inertia to stabilize blade momentum under load
• Tool-less ball bearing blade guide system eliminates guide friction while preventing lateral blade walk
• Tall resaw drift fence adjusts for blade lead angle to guarantee parallel timber slicing
• Rack and pinion upper guide post height adjustment maintains blade support near stock surfaces
• Welded heavy-gauge steel column frame prevents tension spring collapse under severe blade strain
• Twin 4-inch dust extraction ports draw wood particles from upper and lower wheel compartments

Shop Load Telemetry Telemetry

Arbor dynamometer evaluation shows 14.5-ampere draw at 115-volt single-phase power during maximum 13-inch oak resaw passes. Blade surface velocity remains stable at 2920 feet per minute under standard manual feed pressure. Wheel runout checks show less than 0.0012 inches radial deviation on both upper and lower cast iron wheels. Internal tension spring deflection measures 0.32 inches under high-tension 3/4-inch resaw blades. Acoustic sound levels measure 74 dBA during idle running, rising to 83 dBA during resawing.

Service Rules Application Bounds

This floor bandsaw requires dedicated 20-amp 115-volt or 10-amp 230-volt branch wiring to prevent breaker trips during motor startup. Cabinetmakers must not attempt running 1-inch resaw blades because the upper tension assembly tops out at 3/4-inch blade width limits. Do not operate without setting lower guide bearing gaps correctly to avoid blade tracking drift.

• Release upper band wheel spring tension lever after every work shift to prolong rubber tire service life.
• Clean pitch deposits from thrust bearings using citrus-based resin solvent and brass bristle brushes.
• Inspect lower band wheel tire wear and clear trapped sawdust using vacuum attachments weekly.
• Check wheel coplanar alignment using a continuous long straightedge across upper and lower wheel rims.
• Lubricate rack and pinion guide post teeth with dry graphite powder to prevent sawdust sticking.

Warranty Terms Unboxing Manifest

RIKON supports this bandsaw with a 5-Year limited mechanical warranty against manufacturing defects. The unboxing inventory includes the 14-inch band saw chassis, 6-inch tall resaw fence with drift bar, cast iron work table, miter gauge, one 111-inch bandsaw blade, tool kit, and assembly guide.