Campo Equipment Direct LP/NG Fired Heater – 650000 BTU

Description

Feel instant high-output heat push through cold commercial building frames with the Campo Equipment Direct Fired Heater on winter jobsites. This high-capacity torpedo unit outputs 650,000 BTUs using propane or natural gas. It operates as an open-flame direct-fired burner, demanding continuous fresh air ventilation to exhaust combustion moisture and carbon monoxide.

Heavy 16-gauge powder-coated structural steel constructs the long burner cylinder, mounted on a heavy tubular steel cart frame. An industrial electric fan motor draws 9.0 full-load amps on standard 115V 60Hz single-phase circuits, driving a multi-blade axial impeller. Dry cart weight measures 148 lbs without gas hose. Cart dimensions measure 48 inches long, 26 inches wide, and 34 inches high.

Key Features of Campo Blaze 650

General contractors buy Campo Blaze 650 heaters to cure commercial concrete slabs and warm unheated building envelopes during brutal freezes. Equipment pricing delivers massive industrial BTU heat outputs on dual fuel hookups.

• Dual-fuel gas valves switch between liquid propane and natural gas through a simple brass valve selector.
• High-capacity burners throw 650,000 BTUs to warm vast commercial construction bays and open warehouse framing.
• Heavy-duty axial fan blades move 3,500 CFM of heated air deep into uninsulated building structures.
• Continuous spark ignition modules ensure reliable burner lighting during sub-zero morning starts.
• Electronic flame sensor rods shut off gas valves within seconds if combustion flames blow out.
• Ten-inch flat-free solid rubber tires roll over rebar, slab cuts, frozen mud, and construction trash.
• Diagnostic LED indicator lights show gas pressure and electrical faults for fast jobsite troubleshooting.

Combustion Airflow Pressure Bench Metrics

Burner bench testing on liquid propane confirms steady 650,000 BTU heat production at 10 PSI gas regulator pressure. The axial fan moves 3,500 CFM with discharge air temperatures rising 165 degrees Fahrenheit above ambient. Fuel consumption measures 30 lbs of propane per hour under maximum firing rates. Electrical motor draw stabilizes at 8.6 running amps on 115V power lines without voltage drops. Operating sound meter testing records 77 dB at ten feet from the burner snout without housing chatter.

Site Mobility Realities Maintenance

Steering this 148 lb heater over rutted construction grade takes two hands on the rear tubular handle bar. Gas hookups require high-capacity supply hoses and commercial regulator trains. Do not buy this direct-fired burner for occupied indoor rooms, finished basements, or spaces with airborne flammable vapors.

• Test all gas train connections and hose joints with soap bubble solution before each shift.
• Blow drywall dust and jobsite dirt off the fan motor housing every two weeks.
• Clean soot and carbon glaze from the flame sensor rod once each month.

Factory Warranty Manifest Inclusions

Campo Equipment backs this direct-fired heater with a 1-Year limited commercial warranty on parts. The factory wooden pallet delivery includes the complete 650,000 BTU heater cart, pre-mounted flat-free tires, commercial gas regulator train, dual-fuel selector valve, and an industrial field operations manual.