JET 9in x 16in Variable Speed Horizontal Bandsaw

Description

Cold fabrication shop mornings demand dependable cut-off performance, which the JET JT9-891050 Horizontal Bandsaw maintains across solid steel bar. A 1.5HP 115V/230V motor drives a 1in bi-metal blade through 9in round stock at speeds from 82 to 262 FPM. Coolant nozzles require occasional clearing, but the hydraulic downfeed cylinder controls cutting pressure without tooth stripping.

Constructed around a heavy cast iron saw bow and torsion-resistant box frame, this bandsaw prevents blade deflection during deep cuts. The continuous-duty 1.5HP motor pulls 15 FLA at 115V or 7.5 FLA at 230V, driving the gearbox through an electronic variable-speed pulley system. Unboxed tool mass measures 792 lbs, resting on a stable shop floor stance measuring 65in long by 28in wide.

Key Features of JET JT9-891050

Structural job shops buy JET JT9-891050 bandsaws to cut solid alloy rounds, square tubing, and heavy channel iron. Commercial horizontal bandsaw pricing includes an integrated flood coolant system that washes chips away from blade teeth to extend bi-metal tool life.

• Variable speed transmission adjusts blade speed from 82 to 262 FPM to match metal hardness.
• Cast iron saw bow cuts 9in round and 9in by 16in rectangular stock at 90 degrees.
• Hydraulic feed control valve regulates head descent rate for smooth cuts through tough alloys.
• Tungsten carbide blade guides with ball bearing supports prevent blade twist and cut taper.
• Quick-action cast iron vise swivels up to 45 degrees for miter cuts on structural tubing.
• Submersible coolant pump pumps cutting fluid through twin adjustable nozzles.
• Automatic shutoff switch halts blade motion when the saw bow finishes the cut.

Bandsaw Blade Deflection Cut Metrics

Dial indicator measurements show blade guide alignment holds vertical runout under 0.0012in TIR along the cut path. Cutting 4in solid 1018 cold-rolled bar reveals cut face perpendicularity within 0.002in across the diameter. Motor current rises from 3.8 idle FLA to 8.2 FLA under heavy hydraulic downfeed pressure. Gearbox oil temperature stabilizes at 134°F after three hours of continuous sawing. Operating sound levels reach 72 dB. Coolant pump flow rate maintains 4.2 GPM across both cutting guide nozzles.

Saw Operation Preventative Maintenance Rules

The hydraulic downfeed control knob turns with 3 lbs finger torque, providing precise flow regulation across tiny increments. Do not buy this saw for sheet metal contouring, thin architectural wood cutting, or friction sawing. Metal stamping facilities needing vertical throat access should invest in dedicated vertical contour bandsaws with blade welders.

• Clean metal chips from the vise bed and chip tray every 8 operating hours.
• Inspect hydraulic downfeed cylinder fluid level and top up with ISO 32 oil every 200 hours.
• Check blade guide bearing play and adjust carbide shoe clearances every 50 hours.

JET Bandsaw Warranty Crate Contents

JET backs this horizontal bandsaw with a 2-Year commercial warranty against material defects and drive system failures. The wooden shipping crate contains the JT9-891050 bandsaw, one pre-installed 1in bi-metal blade, flood coolant system, adjustable stock stop gauge, and comprehensive technical user manual.