Reelcraft 3/8 in. x 70 ft. REELSAFE Hose Reel

Description

Whiplash hose retractions threaten technician safety and damage expensive vehicle finishes in busy automotive repair shops. The Reelcraft RS7670-OLP REELSAFE Hose Reel stores 70ft of 3/8in inside diameter air hose with an internal centrifugal speed-control brake. It controls rewind speed automatically, though the internal braking mechanism adds slight payout drag during manual line pulls.

A heavy-gauge stamped steel single pedestal arm mounts an all-welded steel spool, a centrifugal safety brake, and a full-flow brass swivel joint. The reel comes factory-equipped with 70ft of 3/8in ID low-pressure PVC hose rated for 300 PSI air service. Complete tool mass sits at 43 lbs across base dimensions of 19.75in long by 7.75in wide by 20.25in tall. High-grade nitrile packings and an enclosed declutching spring motor ensure long mechanical service life.

Key Features of Reelcraft RS7670-OLP

Automotive service shop foremen evaluating safety reel pricing purchase this controlled model for high-traffic mechanic bays. Service managers buy Reelcraft RS7670-OLP reels to supply air tools while eliminating uncontrolled hose whip hazards when technicians release lines across service floor bays.

• A centrifugal safety brake controls hose retraction speed to a safe walking pace during line release.
• The reel includes 70ft of installed 3/8in inside diameter PVC hose rated for 300 PSI air service.
• Heavy-gauge stamped steel single pedestal framing provides rigid support under repetitive manual hose pulls.
• An enclosed declutching spring motor prevents reverse-winding damage during rapid manual line extractions.
• The full-flow brass swivel joint routes compressed air without restriction or tool pressure drop.
• A multi-position locking ratchet secures the hose spool at required working lengths with positive clicks.
• A durable baked-on red powder-coat finish resists shop fluids, moisture, and impact abrasion.

Centrifugal Retraction Bench Proof Test

Retraction testing confirms governed hose recovery speed holding at 1.5 feet per second even during uncontrolled line releases. The brass swivel joint holds 450 PSI hydrostatic test pressure without seal leakage under full flow. Payout pull force registers at 14 lbs at full 70ft extension. The enclosed spring motor and brake assembly complete 30,000 full extension cycles without mechanical failure. Operating noise stays under 61 dB during line recovery.

Service Bay Usability Maintenance Routine

The four-way guide arm positions at multiple angles, feeding hose around service lift posts without chafing rubber jackets. Do not buy this reel for high-pressure hydraulic circuits, grease transfer, or pressures exceeding 300 PSI.

• Inspect the brass swivel seals for air leaks every 30 days using soapy leak detector solution.
• Check the mounting bracket bolts every 90 days and verify 45 ft-lbs torque tightness.
• Wipe the hose jacket and guide rollers with a clean rag every 60 days to remove grease.

Commercial Warranty Factory Package Summary

Reelcraft covers this safety-retract hose reel with a 2-Year limited warranty against manufacturing defects and structural flaws. The factory shipping box contains the assembled RS7670-OLP steel reel, 70ft of installed 3/8in hose, the four-way roller guide arm, an adjustable bumper, and instructions.