Reelcraft Spring Retractable Hose Reel – 1/4 In. x 50 Ft. 5000 PSI with Hose

Description

Blown grease lines and burst high-pressure wash hoses create serious jobsite burn hazards. The Reelcraft Spring Retractable Hose Reel provides 50 feet of factory-installed 1/4-inch high-pressure line on a compact steel spool. Rated to 5000 PSI, it handles chassis grease and hot wash water. The small drum diameter increases line drag during fast pulls.

Stamped from heavy-gauge carbon steel with rolled stiffening ribs, the single pedestal arm eliminates structural twist under off-center pulling loads. Fluid routes through an external high-pressure steel swivel fitted with Viton packings, withstanding intense fluid shock pressures and hot water up to 210°F. A 1-inch solid center steel shaft turns on sealed precision radial bearings. Retraction is powered by an enclosed containerized spring motor that delivers consistent rewinding torque across thousands of shop cycles.

High Pressure Grease Hardware Matrix

Lube service trucks and high-pressure wash bays need compact, high-pressure hose management that eliminates kinks. This steel frame delivers safe high-pressure containment.

• 5000 PSI maximum working pressure accommodates heavy chassis grease, hydraulic oil, and hot wash water.
• 50-foot 1/4-inch wire-braid hose comes pre-installed to eliminate separate line procurement.
• External high-pressure steel swivel with Viton packings handles water temperatures up to 210°F.
• Stamped steel guide arm adjusts to seven distinct positions for ceiling, wall, or truck bed mounts.
• Multi-position locking pawl mechanism holds required hose extension without ratchet slippage.
• Containerized steel drive spring provides safe, consistent line retraction torque across cycles.
• 4-way non-snag roller guide assembly protects outer hose rubber covers against bracket edge wear.

Hydraulic Dyno Telemetry Data

High-pressure flow bench testing tracks line drop and seal thermals during continuous fluid dispense. Pumping NLGI Grade 2 chassis grease at 4500 PSI and 60°F through the swivel produces a 380 PSI drop across the 50-foot core. Swivel housing metal temperature climbs 14°F after two hours of continuous grease cycling. Acoustic testing measures 68 dBA at 3 feet during spring return. The enclosed clock spring produces 22 inch-pounds of pull force, reeling in 50 feet of wire-braid hose without line stall.

Field Service Maintenance Boundaries

Mobile equipment service beds subject reels to severe vibration and road grit. Do not connect this reel to ultra-high-pressure hydro-demolition pumps exceeding 5000 PSI, as the steel swivel will rupture. Avoid mounting on unsupported sheet metal pickup beds without steel backing plates.

• Inspect high-pressure swivel seals for grease weeping every 40 operating hours.
• Clean dirt and foreign grit out of latch ratchet teeth every 30 days.
• Verify mounting bolt tightness every 200 miles on rough haul roads.

Commercial Warranty Package Contents

Reelcraft provides a 2-Year limited commercial warranty covering structural frame failure, drive spring fatigue, and swivel assembly leaks. The package arrives with the assembled steel hose reel, factory-installed 50-foot 1/4-inch high-pressure hose, external steel swivel, adjustable rubber hose stop, and technical mounting instructions.