Milton Hose Reel 1/4in ID x 50′ EPDM Hose with 1/4in NPT

Description

Running small pneumatic tools across expansive fabrication areas creates tangled tripping hazards when using loose floor lines. The Milton Hose Reel 1/4in ID unit provides 50 feet of weather-tough EPDM hose at 300 PSI with 1/4-inch NPT fittings. It feeds tire inflators and paint touch-up guns. The small 1/4-inch line starves high-torque impact wrenches.

Milton fabricates this structural frame from cold-rolled sheet steel protected by a durable powder-coated exterior finish. The internal rotary union features solid brass construction to eliminate corrosion from trapped line water. A precision-wound clock spring inside an enclosed housing delivers controlled retraction tension across the full 50-foot stroke. Four smooth-rolling guide pins steer the 1/4-inch line onto the drum, preventing edge scuffing and premature rubber wear during multi-directional shop pulls.

Field Hardware Performance Matrix

Dedicated bench stations and extended shop aisles require compact pneumatic storage across long payout distances. Weather-resistant EPDM rubber and brass rotary fittings ensure reliable air flow to precision pneumatic hand tools.

• 50-foot 1/4-inch inner diameter EPDM rubber air hose stays supple in freezing temperatures down to minus 40°F.
• 300 PSI maximum operating pressure delivers safe pneumatic energy for high-pressure tire chucks and nailers.
• 1/4-inch male NPT brass connection fittings mate with standard shop blow guns and precision pneumatic tools.
• Solid brass axle and swivel joint prevent galvanic corrosion and ensure leak-free rotary fluid transfer.
• Spring-loaded multiposition ratchet latch locks hose payout to prevent tension tugging on technician hands.
• Dual-arm steel mounting base secures the reel to narrow structural posts, service truck walls, or ceilings.
• Molded rubber hose bumper stop secures the tool connector at the selected resting reach height.

Dyno Load Realities Heat Data

Bench pull evaluations show 5.8 pounds of initial extraction tension, rising to 13.0 pounds at full 50-foot extension. Flow testing reveals an 8.4 PSI line loss while pushing 20 CFM at 90 PSI to high-speed die grinders across the 50-foot length. The enclosed spring motor endures 8000 continuous rewind cycles without spring coil deformation or latch failure. Heat testing proves the EPDM hose compound withstands 180°F temperatures without softening. Retraction sound levels check in at 61 dBA at 3 feet distance.

Field Service Application Limits

Weighing 24 pounds, this unit mounts with four 5/16-inch bolts onto light shop framing or tool carts. Do not hook this 1/4-inch hose line to heavy 1/2-inch impact wrenches or high-demand sanders. The narrow 1/4-inch inside diameter chokes air volume, reducing heavy air tool torque by more than 40 percent.

• Drain compressor line condensation reservoirs every week to keep moisture out of the brass swivel head.
• Inspect the outer rubber hose jacket for friction wear or cuts before starting workshop tasks.
• Check base bracket mounting bolts for tightness every 200 hours of shop operation to prevent loosening.

Commercial Warranty Package Inventory

Milton backs this industrial hose reel with a 1-Year commercial warranty against defects in materials and craft. The product box contains the assembled steel reel, 50 feet of installed 1/4-inch EPDM air hose with 1/4-inch NPT fittings, an adjustable rubber hose stop, and an illustrated installation guide with mounting dimensions.