Coxreels Hose Reel Dual Hose Spring Rewind for Oxygen Acetylene 1/4in ID 100′ 200 PSI

Description

Tear out disorganized torch lines with the Coxreels SHW-N-1100 Oxy-Acetylene Hose Reel to secure hot-work fabrication stations. Twin brass swivels feed 100ft of 1/4in dual line for pressurized oxygen and fuel gas service up to 200 PSI. Dual line weight requires substantial spring return torque, demanding two hands on the torch end during rapid hose rewinds.

Heavy single-pedestal cold rolled steel forms the primary support arm, attached to a 1/4in thick mounting base. Base mounting dimensions measure 10-1/4in by 24in with a net bare tool weight of 79 lbs. Dual CNC machined brass swivels feature independent viton seals rated for 200 PSI working pressure, handling oxy-acetylene cutting gases from minus 20°F up to 225°F.

Key Features of Coxreels SHW-N-1100

Heavy shipyard fabricators and pipe welding operations buy Coxreels SHW-N-1100 hardware to maintain clean hot-work safety standards. Industrial shop bids rely on this twin line unit for tough commercial maintenance shop duty.

• Independent dual brass swivels route oxygen and fuel gas separately to eliminate internal gas cross-contamination.
• Spun steel drum discs incorporate external rolled ribs to maintain true circular shape under high heat.
• Cartridge-style spring pack allows clean module replacement without risking dangerous spring coil release.
• Pivoting multi-position arm mounts to work benches, service truck beds, overhead beams, or concrete walls.
• Heavy-duty latch ratchet locks line at five-inch intervals for precise flame torch position management.
• Dual roller guide brackets route paired hoses without pinch points, line binding, or jacket peeling.
• Chip-resistant blue powder coat delivers long corrosion life in open outdoor industrial fabrication yards.
• Solid 1in steel main axle provides high torsional rigidity under full 100ft hose weight loads.

Dual Gas Seal Bench Verification

Submerged nitrogen pressure tests demonstrate zero bubble emission at 200 PSI across both isolated swivel channels. Spindle deflection remains under 0.008in TIR across the central axle when technicians deploy the entire 100ft hose load horizontally. Payout resistance averages 16 lbs on initial pull and climbs to 29 lbs at full travel. Pawl engagement generates a crisp 67 dB metallic click.

Hot Work Safety Maintenance Guidelines

Do not connect fuel gases exceeding 15 PSI for acetylene lines to comply with OSHA regulations. Do not mount this unit on flimsy vehicle tailgates without backer plates. Technicians wearing heavy welding gloves can grip the ball stop without slippage during payout.

• Brush soapy water over both brass swivel joints every 30 days to check for gas leaks.
• Wipe down hose guide rollers with clean lint-free cloths every 40 hours of heavy use.
• Torque mounting hardware to 50 ft-lbs against structural steel brackets every 6 months.

Verified US Warranty Crate Checklist

Coxreels backs the SHW-N-1100 with a 2-Year factory warranty covering structural components and swivel joints. The wooden shipping pallet contains the bare hose reel, dual brass gas swivels, adjustable dual-line rubber hose stop, and printed operational safety literature.