Ridgid RP 342-XL Press Tool Battery Kit (No Jaws)

Description

Working in cramped commercial mechanical chases requires the Ridgid RP 342-XL Press Tool to join pipes without open flame hazards. The tool utilizes an 18V electro-hydraulic ram to press copper, stainless steel, and carbon steel up to 4in diameter. The extended cylinder length increases overall tool reach, requiring two hands to balance the tool on high pipe racks.

A durable glass-reinforced composite chassis encases the electro-hydraulic pump and motor assembly, resisting drops onto concrete floors. Powered by Ridgid 18V lithium-ion batteries, the hydraulic pump generates 7,200 lbs of linear press force across a 1.25in stroke. This commercial pressing tool measures 20.9in by 10.5in by 3.5in and weighs 11.0 lbs without jaws.

Key Features of Ridgid 65468

Mechanical piping contractors buy Ridgid 65468 tool kits to press copper, carbon steel, and PEX piping systems with a single hydraulic platform. Professional tool pricing reflects the extended stroke capability that presses up to 4in copper and 2in carbon steel fittings.

• An extended hydraulic stroke presses 0.5in to 4in copper and stainless, 0.5in to 2in carbon steel, and 0.5in to 2in PEX.
• A 270-degree swiveling barrel allows operators to orient press jaws around tight pipe chase corners.
• The brushless motor delivers up to 150 presses per charge on 2in copper joints using an 18V battery.
• Integrated LED work lights illuminate pipe fittings inside unlit basement mechanical rooms.
• An automatic cycle sensor ensures complete hydraulic pressure delivery before retracting the ram.
• Microprocessor monitoring tracks service intervals and alerts operators when calibration is due at 40,000 cycles.
• Compatible with standard and extended Ridgid pressing jaws for broad multi-material capability.

Hydraulic Output Press Force Benchmarks

Laboratory load cell testing confirms the hydraulic piston delivers 7,200 lbs of continuous linear thrust. Sinking a press cycle on 3in ProPress copper fittings requires 9 seconds at 68°F ambient temperature. The resulting mechanical joint withstands 600 PSI hydrostatic test pressure without weeping. Sound pressure meters record 74 dB, with hydraulic fluid stabilizing at 122°F.

Plumbing Installation Safety Limits Maintenance Steps

The ergonomic rubber grip cushions hydraulic recoil during joint completion. The jaw retention pin pulls out with 5 lbs hand force to swap pressing rings. Never fire this hydraulic press tool without compatible press jaws secured in the tool collar.

• Inspect the jaw retention pin and locking latch for wear or cracking every 40 hours of use.
• Wipe copper metal shavings and jobsite grit from the ram face every 8 hours.
• Clean battery contact terminals with dry electrical cleaner spray every 30 days.

Warranty Statement Included Package Inventory

Ridgid backs this commercial press tool with their signature Full Lifetime Warranty against material and workmanship defects. The kit includes the RP 342-XL press tool, two 18V 2.5Ah lithium-ion batteries, rapid charger, and heavy-duty plastic carrying case.