Milwaukee M18 FORCE LOGIC Press Tool with ONE-KEY & 1/2 Inch – 2 Inch CTS-V Pivoting Press Ring Kit Bundle

Description

Precision alloy steel components inside the Milwaukee M18 CTS Pivoting Press compress copper fittings inside narrow floor joist cavities. The kit includes a ONE-KEY press tool with 1/2in to 2in CTS-V pivoting press rings and ring actuator. Pivoting rings require an actuator jaw, demanding visual ring alignment into the fitting groove before pulling the trigger.

An all-metal front gear housing protects the high-pressure hydraulic piston from mechanical impacts in boiler rooms. Powered by Milwaukee M18 REDLITHIUM batteries, the brushless motor drives press cycles in five seconds. This commercial pipe press tool measures 16.8in by 11.9in by 4.8in and carries an operational weight of 8.6 lbs without jaws.

Key Features of Milwaukee 2922-20-RING

Mechanical piping contractors buy Milwaukee 2922-20-RING bundles to install commercial copper water lines in tight spaces where rigid straight jaws cannot swing. Investment pricing reflects the inclusion of ONE-KEY digital inventory tracking, five CTS-V pivoting press rings, and a heavy ring actuator jaw.

• A hydraulic pump generates 7,200 lbs of press force to seal copper connections up to 2in diameter.
• The bundle contains 0.5in, 0.75in, 1in, 1.25in, 1.5in, and 2in CTS-V pivoting press rings.
• Pivoting press rings wrap around copper pipes inside narrow wall cavities and ceiling spaces.
• ONE-KEY digital integration provides tool tracking, remote security lockouts, and press cycle audit reports.
• An in-line chassis design balances tool mass for single-hand operation during overhead installations.
• Redundant cycle monitoring verifies full hydraulic pressure before the internal ram retracts.
• LED indicator lights verify joint completion and display battery charge status.
• A brushless motor provides long tool life and fast cycle times across demanding mechanical projects.

Hydraulic Piston Dynamic Force Tests

Testing on calibrated load cells verifies the tool delivers 7,200 lbs of linear press thrust. Pressing a 2in copper coupling requires 5 seconds, yielding a leak-free seal that withstands 600 PSI hydrostatic test pressure. An M18 2.0Ah battery completes 200 presses on 1in fittings per charge. Noise levels hold at 72 dB, with hydraulic temps reaching 118°F.

Jobsite Handling Safety Limits Upkeep Protocol

The inline handle balances tool mass in the hand, while the cycle trigger activates with 3 lbs finger pressure. Jaw quick-release pins operate with 4 lbs force. Never actuate this tool without an approved press jaw or ring actuator locked into the yoke.

• Inspect press ring contact grooves for copper scale or metal burrs every 8 hours.
• Coat the ring actuator jaw tips with light machine lubricant every 50 press cycles.
• Wipe the hydraulic ram slide clean using a dry micro-fiber cloth every 24 hours.

Warranty Statement Machine Delivery Inventory

Milwaukee covers this FORCE LOGIC press tool with a 5-Year tool warranty and a 3-Year battery pack warranty. The bundle includes the 2922-20 press tool, six CTS-V press rings, ring actuator, two M18 batteries, multi-voltage charger, and carrying cases.