Milwaukee M18 FORCE LOGIC Press Tool with ONE-KEY & 1/2 Inch – 4 Inch CTS-V Pivoting Press Ring Kits Bundle

Description

Need complete commercial pipe pressing coverage from half-inch up to four-inch lines? The Milwaukee M18 Press Tool Bundle joins copper fittings with ONE-KEY tracking and pivoting press rings. The tool generates 7,200 lbs of hydraulic force. Pivoting press rings require an actuator jaw, demanding proper ring alignment into the fitting groove before cycle initiation.

An all-metal gear housing protects the high-pressure hydraulic pump from jobsite impacts and debris. Powered by Milwaukee M18 REDLITHIUM batteries, the brushless motor drives press cycles in five seconds. This commercial pipe press tool measures 16.8in by 11.9in by 4.8in and carries an operational weight of 8.6 lbs without jaws.

Key Features of Milwaukee 2922-20-CTS

Mechanical contractors buy Milwaukee 2922-20-CTS bundles to press commercial copper lines up to 4in without open flames or burn permits. Investment pricing reflects the inclusion of ONE-KEY digital inventory tracking, pivoting CTS-V rings, and heavy ring actuator jaws.

• A hydraulic pump generates 7,200 lbs of press force to seal copper connections up to 4in diameter.
• The bundle includes 0.5in to 4in CTS-V press rings designed for Viega ProPress and compatible copper fittings.
• Pivoting press rings access tight pipe joints where rigid straight jaws cannot fit between wall studs.
• ONE-KEY digital integration provides tool tracking, remote security lockouts, and press cycle audit reports.
• An in-line chassis design balances tool mass for single-hand operation during overhead installations.
• Redundant cycle monitoring verifies full hydraulic pressure before the internal ram retracts.
• LED indicator lights verify joint completion and display battery charge status.

Hydraulic Press Dynamic Force Tests

Testing on calibrated load cells verifies the tool delivers 7,200 lbs of linear press thrust. Pressing a 4in copper coupling requires 8 seconds, yielding a leak-free seal that withstands 600 PSI hydrostatic test pressure. An M18 2.0Ah battery completes 200 presses on 1in fittings per charge. Noise levels hold at 72 dB, with hydraulic temps reaching 118°F.

Jobsite Handling Safety Limits Upkeep Protocol

The inline handle balances tool mass in the hand, while the cycle trigger activates with 3 lbs finger pressure. Jaw quick-release pins operate with 4 lbs force. Never actuate this tool without an approved press jaw or ring actuator locked into the yoke.

• Inspect press ring contact grooves for copper scale or metal burrs every 8 hours.
• Coat the ring actuator jaw tips with light machine lubricant every 50 press cycles.
• Wipe the hydraulic ram slide clean using a dry micro-fiber cloth every 24 hours.

Warranty Statement Machine Delivery Inventory

Milwaukee covers this FORCE LOGIC press tool with a 5-Year tool warranty and a 3-Year battery pack warranty. The bundle includes the 2922-20 press tool, 0.5in to 4in CTS-V press rings, ring actuators, two M18 batteries, charger, and two carrying cases.