Baileigh R-M55H Hydraulic Angle Ring Roll Bender Machine

Description

Form smooth compound curves, commercial trailer bows, and equipment bumper hoops with powered hydraulic downfeed. The Baileigh R-M55H Hydraulic Angle Ring roll bender machine delivers heavy profile bending capacity. This industrial roll bender operates in horizontal and vertical positions. The machine requires 220V three-phase power to drive its hydraulic and electric systems.

Heavy-duty structural steel plates form the welded bender housing, resisting deflection under heavy top roll hydraulic thrust. A hydraulic cylinder drives the top roll downward, allowing operators to make incremental radius adjustments under full material tension. Two lower rolls are driven by a high-torque electric motor through planetary gearboxes. The entire machine frame tilts from vertical to horizontal orientation, accommodating large sweeping arches without ceiling interference.

Key Features of Baileigh BA9-1006859

Trailer builders and architectural metal fabricators use this hydraulic roll bender to roll roll-cage tubing and structural angle iron. The tilting frame adapts to varying shop space limits.

• 2-inch schedule 40 pipe bending capacity rolls heavy structural tubing into circular curves
• Hydraulic top roll adjustment provides immense downward force for tight radius profile bends
• Dual orientation frame pivots between vertical and horizontal positions to handle long stock
• Two driven lower rolls maintain positive material traction without surface slippage
• Includes standard roll set configured for bending flat bar, square tube, and angle iron
• Digital readout display shows top roll position for high repeatability on multiple production bends
• Movable operator foot pedal control provides forward and reverse rotation control

Angle Roll Dynamometer Bench Telemetry

Dynamic bending tests confirm continuous rolling of 2x2x1/4 inch structural angle iron into a 24-inch ring under 2600 PSI hydraulic downforce. Electric drive motor current draw measures 8.4 amps on 220V three-phase power. Drive roll shaft runout measures under 0.0010 inches across the 2.16-inch shaft diameters. Top roll positioning holds tolerance within 0.001 inches on the digital display. Acoustic noise registers 72 dBA.

Profile Bending Operation Safety Guardrails

Bolt the bender base to the floor and verify tilt frame lock pins are fully seated before starting operations. Feed structural profiles straight between roll dies and keep hands away from rotating drive shafts. Do not exceed manufacturer profile capacity charts when rolling high-tensile solid bar stock.

• Hydraulic fluid reservoir requires ISO 46 anti-wear oil level checks monthly
• Roll shaft planetary gearboxes require synthetic gear oil changes every 2000 hours
• Roll guide lateral roll shafts demand daily grease lubrication via grease fittings

Baileigh Ring Roll Bender Warranty

Baileigh Industrial covers this hydraulic angle roll with a 1-Year commercial warranty against manufacturing and mechanical defects. The package includes the R-M55H bender, standard tooling set, foot pedal console, and operator manual.