Baileigh Slip Roll Machine SR-5016M

Description

Meeting commercial sheet metal shop standards, the Baileigh SR-5016M Manual Slip Roll shapes 16-gauge mild steel across 50in widths. Three gear-driven carbon steel rolls shape cylinders and cones without electricity. The manual hand crank provides positive speed control, though rolling full 50in sheets of 16-gauge cold-rolled steel requires substantial manual torque on the crank handle.

Solid cast iron end frames support three precision-turned carbon steel rolls running on greaseable bronze bushings. Operating without electrical requirements, this manual tool mounts to its included heavy plate floor stand. Overall tool stance measures 66in length by 18in width by 43in height, with a complete dry tool weight of 550 lbs.

Key Features of Baileigh SR-5016M

HVAC duct fabricators buy this 50in slip roll to keep round pipe production pricing within budget. The top roll pivots open to let operators slide closed cylindrical tubes off the machine.

• Precision-turned 3in carbon steel rolls form cylinders down to 4in minimum inside diameter.
• Upper forming roll swings out to slide finished metal cylinders off the machine arbor.
• Large manual hand crank delivers mechanical gear reduction to drive the lower pinch rolls.
• Twin manual thumb screws adjust rear forming roll height to control cylinder radius.
• Three integrated wire grooves roll small steel rods and wired sheet metal edges.
• Solid cast iron upright housings resist spread under heavy sheet pinching loads.
• Heavy steel floor pedestal provides an ergonomic roll working height for operators.
• Quick-release top roll latch locks back down without losing prior roll radius settings.

Roll Parallelism Tube Deflection Tests

Bench testing demonstrates roll runout stays under 0.0003in TIR along the middle span of all three rolls. Center roll deflection measures less than 0.0008in when rolling 16-gauge mild steel sheet across the 50in width. Manual crank handle torque holds at 22 lbs under full-width forming passes. Bronze roll bushings show zero measurable play after 200 hours of continuous test cycles.

Pedestal Ergonomics Bushing Maintenance Schedule

Turning the drive hand crank requires 15 lbs manual effort when forming 18-gauge sheet ductwork. The top roll release lever swings open with 6 lbs hand lift force. Do not attempt rolling plate thicker than 16-gauge mild steel across the full 50in bed width.

• Lubricate the roll journal bronze bushings with NLGI 2 lithium grease every 16 hours.
• Apply ISO 68 machine oil to the drive gear teeth every 40 operating hours.
• Wipe the ground roll faces with corrosion prevention oil every 30 days.

Baileigh Slip Roll Warranty Manifest

Baileigh covers the SR-5016M slip roll with a 1-Year parts warranty and lifetime technical customer assistance. The machinery shipping skid holds the SR-5016M slip roll, three wire-grooved rolls, heavy steel floor stand, manual hand crank, and operator instruction manual.