Sunex 10 Ton Air/Hydraulic Floor Service Jack

Description

Slide long-reach steel chassis frames under heavy vocational vehicle axles using the Sunex 6614 Floor Service Jack. This 10 Ton air-assist hydraulic lift raises 20,000 lbs up to 27in maximum height. Heavy fleet garages service bus suspensions without frame deflection. The long 60in chassis requires substantial floor space to swing and position between service bays.

Laser-cut structural steel side plates measure 3/8in thick, cross-braced with solid steel round bars to eliminate frame twist. The air-over-hydraulic intensifier motor operates on bay line pressures from 90 PSI to 140 PSI alongside a manual foot pump pedal. Overall base dimensions span 60in long by 20in wide, carrying a substantial unladen tool mass of 370 lbs.

Key Features of Sunex 6614

Commercial fleet maintenance facilities buy Sunex 6614 jacks to speed up spring repairs and tandem axle rebuilds. Fleet tier pricing provides solid return on capital for municipal transit shops and heavy truck repair operations.

• Rated lift capacity delivers 10 Tons equivalent to 20,000 lbs to lift loaded commercial dump trucks.
• Low starting saddle height of 6-1/2in clears low-slung bus crossmembers and dropped front axles.
• High lifting reach extends to 27in to unload chassis springs and provide room for heavy axle stands.
• Pneumatic foot treadle pumps the hydraulic cylinder using shop air to eliminate manual pumping.
• Manual pump foot pedal allows fine-tuned saddle positioning without connecting air hoses.
• Large 6in ductile iron front wheels traverse broken shop floors and air hoses without sticking.
• Three-position handle locks upright, at 45 degrees, or horizontal to maneuver under deep overhangs.

Hydraulic Thrust Structural Rigidity Data

Bench testing with a 20,000 lbs load block shows the air motor lifts the saddle to full 27in height in 26 seconds on 120 PSI air. Hydraulic pressure peaks at 5,800 PSI with zero fluid bypass past the hardened steel check valves. Chassis beam deflection measures 0.055in along the 60in steel frame spine. Sound levels measure 74 dB during continuous air-powered lift strokes.

Bay Navigation Routine Hydraulic Upkeep

Weighing 370 lbs, this service jack requires 28 lbs of pull force on the steel T-handle across industrial epoxy floors. The handle detent latch locks positively using a mechanical spring catch. Do not buy this extended steel chassis jack for small home garages or light passenger cars.

• Add 5 drops of 10-weight non-detergent air tool oil into the air coupler every 20 hours.
• Grease the lift arm pivot pin and caster swivel bearings with NLGI 2 grease every 30 days.
• Check the hydraulic oil reservoir level and top off with clean ISO 32 oil every 6 months.

Sunex Warranty Coverage Crate Manifest

Sunex backs this long-chassis service jack with a 1-Year commercial warranty covering hydraulic and structural components. Freight delivery weight reaches 410 lbs on a wood pallet. The shipment includes the 6614 jack chassis, modular T-handle, air supply hose whip, 6in steel saddle, and parts list.