Genie 12 Ft. 6 In. Super Hoist Portable Telescoping Pneumatic Material Lift (CO2 Bottle Not Included)

Description

Durable extruded aluminum tubes give the Genie GH-3.8 Super Hoist Lift light portability on commercial jobsites. This pneumatic telescoping hoist elevates 300 lbs up to 12ft-6in working heights using compressed gas lines. Compact tripod legs fold flat for passenger car transport. Technicians must inspect line pressure regulators before connecting carbon dioxide supply bottles.

Anodized aluminum cylinder tubes telescope inside each other, sealed with low-friction polyurethane cup seals. The folding tripod steel base features legs that fold up against the mast cylinder for transit. Staging base dimensions measure 54in across the open leg tips, collapsing down to 14in diameter when stowed. Total bare tool weight equals 75 lbs without gas bottles.

Key Features of Genie GH-3.8

Commercial ceiling contractors buy Genie GH-3.8 lifts to hang sheet metal duct sections and electrical heaters without manual winch cranking. Practical commercial pricing makes this pneumatic lifter a staple for high-speed interior tenant fit-out crews.

• Rated lift capacity handles 300 lbs to hoist sheet metal ducts, unit heaters, and ceiling speakers.
• Extended reach elevates loads up to 12ft-6in to access high commercial ceiling trusses.
• Pneumatic drive operates using portable carbon dioxide bottles or standard 85 PSI shop air lines.
• Pistol-grip control valve meters gas flow to regulate lift ascension and descent speeds.
• Folding steel tripod legs deploy in seconds without tools, securing base stance with detent pins.
• Compact stowed stance collapses to 41in tall by 14in wide for simple passenger car trunk transport.
• Platform bracket accommodates standard wood trays, cradles, or custom mechanical duct fixtures.

Pneumatic Seal Pressure Lift Rate Data

Supplying 85 PSI gas pressure drives a 300 lbs test payload to full 12ft-6in height in 20 seconds. Internal polyurethane piston seals show zero pressure loss over 2 hours of static ceiling hold. Mast column flex measures 0.650in at maximum elevation under full rated weight. Gas consumption averages 0.4 lbs of carbon dioxide per full-height cycle.

Tripod Stance Rules Piston Seal Upkeep

Deploying the folding legs requires pulling spring-loaded steel lock rings on each leg hinge. The pistol-grip control valve operates with 2 lbs finger squeeze force. Do not buy this pneumatic telescoping lift for unbalanced cantilever loads or outdoor wind exposure.

• Wipe road grit and drywall dust off the telescoping aluminum mast tubes every 8 operating hours.
• Coat the pistol-grip control valve seals with light silicone air tool lubricant every 40 hours.
• Inspect the folding leg hinge brackets and locking pins for fatigue every 90 days.

Genie Pneumatic Warranty Boxed Inclusions

Genie warrants this pneumatic Super Hoist with a 1-Year commercial warranty covering cylinder seals and valves. Shipping carton weight sits at 84 lbs total. The box includes the GH-3.8 telescoping mast, folding leg unit, load platform, air hose whip, and operation manual.