Genie 16 Ft. 4 In. Superlift Advantage Material Lift

Description

Position heavy rooftop water coils overhead using the Genie SLA-15 Superlift Advantage Lift. This manual cable lifter elevates 800 lbs up to 16ft-4in working heights across commercial jobsites. A patented mast design provides compact transport dimensions through standard commercial doorways. Field crews must swing the standard steel stabilizer legs outward by hand before hoisting heavy payloads.

Extruded aircraft aluminum mast columns nest inside a heavy-gauge welded steel chassis carriage. A single-speed manual hand crank winch utilizes internal friction brake discs to control loads during raising and lowering. The standard base dimensions span 59in long by 31-1/2in wide with legs folded, expanding to 58in wide with legs open. Total tool mass reaches 333 lbs without forks.

Key Features of Genie SLA-15

Mechanical piping trades buy Genie SLA-15 hoists to place heavy duct runs and water coils without renting hydraulic boom cranes. Competitive commercial pricing keeps capital equipment budgets balanced for busy mechanical contractors.

• Rated lift capacity handles 800 lbs to elevate heavy packaged chiller coils, steel pipes, and motors.
• Maximum mast lifting height reaches 16ft-4in to access standard commercial drop-ceiling structural lines.
• Standard base design rolls through standard single doorways without tilting the vertical mast frame.
• Interchangeable steel fork attachments mount in standard or inverted orientations for maximum ceiling reach.
• Single-speed manual hand crank winch features an automatic internal brake to prevent load drop upon handle release.
• Heavy-duty 4in front swivel casters and 8in rear wheels roll across rough jobsite concrete with ease.
• Mast hold-down bar secures carriage stages during open-bed truck transport between job locations.

Mast Deflection Winch Cable Pull

Static proof load testing with 800 lbs at full 16ft-4in elevation shows mast tip deflection of 0.980in. The multi-strand steel cable tracks across machined aluminum sheaves with zero groove wear or strand fraying. Winch crank effort requires 25 lbs of hand force under full load. Internal gravity brake pawls engage within 0.25in of handle release, preventing uncontrolled load drops under full test weight.

Jobsite Mobility Rigging Maintenance Steps

Five-inch non-marking caster wheels require 22 lbs of push force across broom-finish concrete slabs. The folding base legs lock out with spring-loaded steel detent pins. Do not buy this cable hoist for overhead personnel elevation or permanent industrial crane duty cycles.

• Inspect the steel lift cable for kinks, crushed sections, or broken wires every 10 operating hours.
• Coat the telescoping mast contact channels with dry graphite lubricant every 40 hours of use.
• Grease the winch drive pinion gear teeth with NLGI 2 lithium grease every 90 days.

Genie Factory Warranty Packaging Manifest

Genie backs this material lift with a 1-Year commercial tool warranty against manufacturing defects. Total shipping crate weight totals 365 lbs on a freight pallet. The unboxed shipment contains the SLA-15 standard base lift mast, standard steel forks, winch handle, and an illustrated parts breakdown sheet.