Power Team 10 Ton 4 1/8in Cylinder Stroke C Series Single Acting

Description

A 4-1/8in stroke delivers 10 Ton pushing power inside the Power Team C104C Hydraulic Cylinder. This single-acting spring-return ram generates 20,000 lbs of linear thrust across machine maintenance and pressing setups. A heavy internal return spring retracts the piston rod once valve pressure drops. Technicians must connect an external 10,000 PSI hydraulic pump to operate this unit.

Solid high-carbon alloy steel billet forms the cylinder body, drilled and burnished to mirror interior wall finishes. The alloy steel piston rod receives hard chrome plating to eliminate metal gauling against bronze gland nuts. Cylinder base diameter measures 2-1/4in with a collapsed height of 6-3/4in. Total dry component weight sits at 7.3 lbs, featuring standard 3/8in NPTF hydraulic ports.

Key Features of Power Team C104C

Production facilities buy Power Team C104C cylinders to build custom hydraulic arbor presses and clamp heavy weldments. Accessible component pricing makes keeping spare cylinders in plant maintenance cribs cost effective.

• Working force capacity reaches 10 Tons at maximum 10,000 PSI fluid pressure for industrial pushing.
• Stroke length of 4-1/8in supplies ample travel distance for bearing removal and structural alignment.
• Heavy-duty internal return spring pulls the piston rod back into the body upon line venting.
• Standard collar threads measuring 2-1/4in 14 UNS mount directly into production fixtures and press frames.
• Base mounting holes tap 5/16in 18 thread to anchor the cylinder securely against steel plates.
• High-flow 3/8in NPTF female half coupler couples straight to mobile hydraulic hand pumps.
• Snap-in grooved saddle prevents workpiece slippage during high-tonnage mechanical pressing tasks.

High Pressure Seals Piston Retraction

Bench evaluations at 10,000 PSI show zero fluid weep across the polyurethane rod wiper seal over 100 continuous stroke cycles. Piston retraction under spring tension alone completes in 2.2 seconds through standard 6ft high-pressure hoses. Under off-center loading limits of 5 degrees, the internal bronze guide bushings prevent cylinder wall scoring while holding maximum rated hydraulic pressures.

Coupler Engagement Field Hydraulic Service

Connecting the 3/8in quick coupler demands clean hand engagement without thread cocking to prevent poppet valve seal destruction. The knurled cylinder collar threads engage press plates with minimal hand effort. Do not buy this single-acting cylinder for pulling or tensioning applications requiring powered piston retraction.

• Inspect the female hydraulic coupler threads and rubber dust cap for metal contamination every shift.
• Wipe down the exposed chrome piston rod with clean lint-free cloth after dirty pressing tasks.
• Replace worn polyurethane U-cup rod seals using an official factory seal kit every 500 service hours.

Power Team Warranty Boxed Contents

Power Team warrants this hydraulic cylinder under their Marathon Lifetime Warranty against manufacturing or material defects. The package ships in a heavy cardboard carton at 8 lbs total weight. Unboxing yields the C104C single-acting cylinder, pre-installed female quick coupler, heavy-duty grooved saddle, thread protector, and safety literature.