Milwaukee 1 Ton Electric Chain Hoist 20 Ft. Lift

Description

Need to hoist 2,000 lbs dies up to high mezzanine floors without chain falls? The Milwaukee 9568 Electric Chain Hoist provides 20ft of powered lift for industrial machine shops. A 1HP single-phase motor lifts loads at a steady 16 FPM speed. Electrician hookups connect to standard 115V wall drops or switch to 230V commercial feeds.

Heavy cast iron gear housings encase hardened steel helical gear sets running in an internal oil bath reservoir. The industrial electric motor draws 12 FLA at 115V single-phase power, with internal leads to reconnect for 230V operation. Overall hoist bare weight reaches 124 lbs, featuring a rugged structural stance that requires 17in headroom clearance between hook saddles.

Key Features of Milwaukee 9568

Industrial toolrooms and fabrication centers buy Milwaukee 9568 hoists to place heavy stamping dies and motor beds safely. Industrial pricing delivers solid heavy-metal durability built to withstand decades of harsh machine shop environments.

• Lifting capacity reaches 1 Ton equivalent to 2,000 lbs for heavy industrial machinery positioning.
• Reliable 1HP electric motor delivers a steady 16 FPM vertical lift rate under maximum rated tonnage.
• Cast iron housing construction damps mechanical gear vibration and sheds heat during long lifts.
• Dual braking system combines a mechanical Weston load brake with an electromagnetic motor brake.
• Dual-voltage motor wiring connects to standard 115V drops or reconnects to 230V commercial circuits.
• Alloy steel lower load hook swivels 360 degrees on roller thrust bearings to prevent chain twist.
• High-tensile Grade 80 alloy load chain resists heavy wear and industrial chemical mist corrosion.

Thermal Rise Static Load Hold Data

Under a 2,000 lbs test slug, the dual braking system halts downward movement with zero measurable hook drift. Running 10 continuous lift cycles raises the internal oil bath temperature by 28°F, maintaining lubricant viscosity well within safe parameters. Motor current draws 11.6A under full load, while noise emissions remain below 72 dB at operator ear level.

Pendant Control Rigging Maintenance Protocol

The heavy-duty rubber pendant enclosure requires 3 lbs thumb pressure on push buttons, delivering positive tactile contact through work gloves. Hook latches feature heavy spring returns for positive closure. Do not buy this single-speed hoist for high-speed automated production line duty cycles.

• Drain and refill the internal gear housing with SAE 80W-90 industrial gear oil every 500 hours.
• Apply heavy chain lubricant to the entire Grade 80 load chain span every 30 operating hours.
• Inspect hook throat dimensions with calipers every 30 days to verify zero spread past 0.050in wear limits.

Milwaukee Warranty Terms Shipping Manifest

Milwaukee covers this heavy electric chain hoist with a 1-Year commercial warranty against manufacturing defects. Shipping pallet delivery sits at 136 lbs total weight. The crated unit includes the 9568 electric hoist, 20ft Grade 80 load chain, wired pendant station, lower hook block, and technical manual.