JET Scissor Lift Table 1650-Lb Capacity

Description

Raise heavy shop loads with JET Scissor Lift Table 1650-Lb capacity when floor-level handling creates strain and poor workstation access. Experienced maintenance technicians gain controlled elevation during fabrication, warehouse staging, and equipment service, but can a 1,650-lb load remain stable when it is off-center or placed on an uneven floor? Its all-steel frame and table, hydraulic foot pump, overload ball valve, and braked casters support material positioning rather than personnel lifting.

Model JT9-140779 lists a 1,650-lb capacity, 35-5/8-inch maximum height, 39-3/8 by 20-1/8-inch table, and 5-inch poly-over-steel wheels. Other published fields show a 16-inch minimum height, approximately 38-inch maximum height, 46-inch platform length, 20-inch width, and weight figures of 229 or 259 lbs. Confirm the current product data before planning floor clearance, transport, or installation.

Features of JET Lift Table

Machine shops, fabrication bays, warehouses, and service departments need a heavy-duty scissor lift table for raising dies, gearboxes, fixtures, and components. Trained operators can use this hydraulic lift table when the platform, floor, casters, brake, load balance, and capacity remain within documented limits.

• 1,650-lb capacity supports compatible machinery, fixtures, tooling, and maintenance components.
• 35-5/8-inch listed maximum height raises material toward workstations and benches.
• 39-3/8 by 20-1/8-inch table dimensions provide a defined support surface.
• Hydraulic foot-pump operation supports manual table elevation without an electric motor.
• Overload ball valve helps prevent lifting beyond maximum rated capacity.
• Top-stroke release valve limits cylinder extension beyond maximum height.
• Five-inch poly-over-steel wheels support movement across suitable shop floors.
• Fixed rear wheel brakes help secure the table during stationary work.

Load Test Stability Control

No independent proof-load result, frame-deflection measurement, hydraulic pressure test, lowering-speed result, wheel-brake telemetry, or caster-load certification was supplied. Do not treat 1,650 lbs as a proof load. Off-center loading, uneven floors, sudden movement, hydraulic leakage, damaged wheels, and side pressure can affect the scissor arms, platform, frame, and cylinder. Stop operation if the table tilts, drifts, binds, or develops abnormal noise.

Operation Limits Service

The hydraulic foot pump, steel frame, overload ball valve, top-stroke release, steel table, and braked casters support material positioning in shops, factories, warehouses, and offices. This lift table is not verified for personnel lifting, permanent support, unstable floors, overhead suspension, or loads above 1,650 lbs.

• Inspect scissor arms, pivot pins, platform welds, hydraulic components, wheels, and brakes.
• Center the load, confirm floor stability, and engage parking brakes before raising material.
• Remove the table from service after hydraulic leakage, structural damage, or abnormal lowering.

Warranty Compliance Contents

JET lists a 2-Year Limited Warranty for model JT9-140779. Package contents identify a scale, while the table, hydraulic system, wheels, and platform are part of the listed configuration. Confirm current warranty terms, operator manual, inspection documentation, platform dimensions, height range, caster specifications, and scale details before commercial use.