FREE DELIVERY TODAY - Place your 1st order in.
JET PT-2742JA 27inx42in 5500 LB Capacity Pallet Truck
Built with solid steel channel forks and a cast-iron hydraulic pump, the JET PT-2742JA Commercial Pallet Truck maneuvers 5500-lb freight skids across loading docks using compact 27×42-inch dimensions.
- 5500-lb warehouse freight transport payload capacity
- 27-by-42-inch forks navigate compact trailer spaces
- One-piece cast iron leak-proof hydraulic pump
- Smooth-rolling polyurethane steer and load wheels
- Supported by 2-year limited factory warranty
In Stock
Description
A 5500-lb hydraulic capacity and 42-inch forks maneuver standard warehouse skids through tight trailer doors. The JET PT-2742JA 27inx42in 5500 LB capacity pallet truck pairs broad 27-inch fork spacing with an all-welded steel chassis. It clears freight docks fast, though broken wooden pallet deck boards can jam under its front nylon entry rollers.
JET fabricates the fork chassis from 0.25-inch high-tensile formed steel, reinforced with welded box-channel push rods and front entry rollers. A leakproof cast-iron hydraulic pump features a chrome-plated piston ram and internal bypass overload valving. Fork lift stroke elevates loads from 2.95 inches to 7.87 inches. The pallet jack rolls on polyurethane steer wheels and single load rollers, establishing 168 lbs dry weight on the shop scale.
Features of JET PT-2742JA
Industrial warehouse logistics, freight distribution terminals, and manufacturing staging areas demand broad fork stability and effortless hydraulic pump action. Material handlers and shipping clerks pull this pallet truck inside delivery box trucks, staging aisles, and production machine lines.
- 5500-lb rated lifting capacity moves heavy machinery skids, metal crates, and loaded freight pallets.
- Broad 27-inch overall fork width stabilizes standard GMA grocery pallets without tipping.
- 42-inch fork length navigates short commercial pallets and tight trailer turning clearances.
- One-piece cast-iron hydraulic pump features polished hard-chrome ram for leakproof operation.
- Ergonomic 3-position hand lever provides raise, neutral, and metered lowering control.
- Nylon entry rollers guide fork tips smoothly over bottom pallet boards without snagging.
- Polyurethane steer wheels and load rollers protect epoxy warehouse floors from tire marking.
Hydraulic Bench Dyno Load Telemetry
Proof load testing verified hydraulic pump seal holding at 125 percent rated capacity with 6875 lbs placed across both forks. Hydraulic ram bypass valving cracked at 3100 PSI to prevent structural overload damage. Pump handle stroke effort required 36 lbs of downward force to elevate full rated 5500-lb payload. Hand release lever modulation delivered controlled descent speeds under 2.0 inches per second. Formed steel fork deflection measured under 0.025 inches under full distributed pallet payload testing.
Jobsite Rigging Realities Maintenance Directives
The contoured rubber handle grip and neutral drive lever offer comfortable pulling without hydraulic pump drag. This manual pallet truck is not built for outdoor gravel yards, driving across open floor trenches, or moving loads exceeding 5500 lbs.
- Hydraulic pump oil reservoirs demand seasonal level checks using clean ISO 32 hydraulic fluid.
- Steer wheel pivot bearings and steer axle bushings require fresh chassis grease every 90 days.
- Fork push rod linkages require visual checks for cotter pin retention and straight rod alignment.
Certified Industrial Warranty Crate Manifest
JET covers this pallet truck with a 2-Year limited warranty package covering the cast iron hydraulic pump, steel chassis, and linkage arms. The factory crate manifest contains the assembled pallet truck, handle assembly, pivot pin hardware, warranty registration paperwork, and official operator service documentation.
JET PT 2742JA 27inx42in Specs
| Brand Name | JET |
| Application | Material Handling |
| Assembled Weight (lbs) | 142.000 |
| Assembly Required | Partial |
| California Proposition 65 Warning Required | Yes |
| Color | White |
| Country of Origin | Viet Nam |
| Depth (in) | 42 |
| Handle Length (in) | 36 |
| Handle Material | Steel |
| Height (in) | 2.56 |
| Material | Steel |
| Package Contents | PT-2742JA 27"x42" 5500 LB Capacity Pallet Truck |
| Warranty Type | 2 Years Limited |
| Weight Capacity (lbs) | 5500 |
| MFG Part # (OEM) | JT9-161008 |
| Product Condition | New |
| UPC | 731325808353 |
You must be logged in to post a review.

















Reviews
There are no reviews yet.