Grabo High Flow 242 Lbs Capacity Cordless Vacuum Lifter Kit

Description

Meeting modern material handling safety standards on jobsites demands the powered suction of the Grabo GHF-V1 Vacuum Lifter Kit. This high-flow cordless suction tool lifts 242 lbs across non-porous and semi-porous building panels. Dual high-flow vacuum pumps seal rough stone and unpolished plywood. Workers must clean dust from the foam rubber seal to prevent vacuum loss.

High-impact ABS polymer forms the main tool body, housing an integrated digital pressure gauge and twin electric vacuum pumps. A removable 14.8V 2.6Ah lithium-ion battery pack powers the dual pumps, delivering up to 1.5 hours of continuous suction run time. Base suction plate dimensions span 11-1/2in long by 7in wide. Total tool weight with battery sits at 3.3 lbs.

Key Features of Grabo GHF-V1

Glaziers and masonry installers buy Grabo GHF-V1 lifters to place heavy glass panes, quartz slabs, and textured tiles safely. Jobsite-focused pricing makes outfitting tile and stone crews fast and economical for finishing subcontractors.

• Maximum perpendicular lifting capacity handles 242 lbs on smooth non-porous glass and stone slabs.
• High-flow dual vacuum pumps move 20 liters per minute to seal rough stone and textured wood panels.
• Digital pressure sensor monitors vacuum levels, turning pumps on automatically if pressure drops below 11 PSI.
• Removable 14.8V lithium-ion battery charges to 100 percent in two hours on standard 110V power.
• Multi-layer foam rubber vacuum seal conforms to rough slate, patterned tile, and dry drywall surfaces.
• Built-in digital LCD screen displays current vacuum pressure in bar and remaining battery charge percentage.
• Four perimeter steel anchor rings connect to crane lifting straps or tool lanyards for high-elevation work.

Vacuum Retention Pump Flow Benchmarks

On polished granite slabs, the high-flow pumps achieve negative 11.6 PSI vacuum within 3.5 seconds of activation. The automatic sensor cycles the pumps back on within 0.5 seconds if vacuum drops below 11.0 PSI on textured surfaces. Static vertical hang tests with 240 lbs show zero seal creep over 30 minutes on non-porous plate glass.

Handle Grip Balance Foam Seal Service

The contoured tool handle fits gloved hands with excellent balance, centering operator grip directly above the vacuum plate. The push-button power switch engages with light thumb force. Do not buy this handheld vacuum lifter for wet greasy metal plates or dusty crumbly concrete blocks.

• Inspect the foam rubber vacuum seal for cuts, gouges, or tears before every work shift.
• Wipe fine dust from the rubber seal surface with a damp cloth after each stone installation job.
• Clean the internal air filter foam insert using low-pressure compressed air every 30 operating days.

Grabo Manufacturer Warranty Hard Case Inclusions

Grabo warrants this cordless vacuum lifter kit with a 1-Year commercial warranty against electrical and pump failure. The complete package arrives in a rugged soft-sided transport bag weighing 5.5 lbs total. The kit contains the GHF-V1 lifter, one 14.8V battery, a 110V wall charger, replacement seal, and manual.