FREE DELIVERY TODAY - Place your 1st order in.
Atlas Lifting and Rigging ALH 6.3 Ton Lever Chain Hoist 20 Ft. Chain 13890 lbs
Spanning an extended 20-foot load chain drop, the Atlas Lifting and Rigging ALH-063-20 Lever Chain Hoist pulls 13890 lbs through heavy-duty gear reduction, positioning structural bridge assemblies without mechanical drift.
- 13890-lb heavy working load limit tension
- Extended 20-foot continuous Grade 80 chain
- Heavy 108.9-lb industrial grade steel casting
- Multi-gear reduction reduces manual handle effort
- Covered by 3-year limited warranty protection
In Stock
Description
A 13890-lb mechanical pulling capacity handles heavy shipyard alignment and structural steel tensioning across deep spans. The Atlas Lifting and Rigging ALH 6.3-ton lever chain hoist delivers brute mechanical leverage across a 20-foot reach. It positions bridge girders secure, though lever operating effort demands steady two-man handle pacing on full-capacity pulls.
Atlas constructs the heavy hoist body from structural stamped steel, enclosing heat-treated spur gears and a Weston-style mechanical load brake. Two falls of Grade 80 black oxide alloy load chain feed through machined guide rollers to dual forged swivel hooks. An integrated mechanical ratchet pawl locks load tension positive on every stroke. Total unladen tool weight registers at 82 lbs on the shop rigging scale.
Features of Atlas 6.3-Ton Hoist
Heavy construction rigging, structural steel pulling, and turbine alignment demand massive ratcheting tonnage and dependable mechanical braking. Riggers and millwrights deploy this high-tonnage lever hoist inside engine rooms, crane gantries, and pipe trenches.
- 13890-lb rated lifting and pulling capacity handles heavy tractor frames, structural steel, and machinery.
- 20-foot Grade 80 alloy steel load chain provides exceptional tensile strength and deep reach.
- Weston-style mechanical automatic load brake holds full rated capacity the instant ratcheting motion stops.
- Heavy ratcheting hand lever delivers maximum mechanical advantage during extreme structural pulls.
- Free-wheeling chain mechanism allows swift manual chain take-up to hitch tension points fast.
- 360-degree swiveling forged alloy hooks with safety latches prevent rigging sling disengagement.
- Enclosed stamped steel gear housing protects internal ratchet teeth from mud, grit, and rain.
Mechanical Bench Proof Load Telemetry
Proof load diagnostics verified mechanical brake holding at 150 percent rated capacity under a certified 20835-lb static load test. Ratchet mechanism friction produced a modest 13°F temperature climb above ambient room temperature after twenty consecutive full-load strokes. Manual lever operating effort required 84 lbs of handle pull to tension full 6.3-ton capacity. Decibel sensors registered 66 dBA during ratcheting strokes. Forged hook throat opening showed zero measurable stretch under destructive proof load testing conditions.
Jobsite Rigging Realities Maintenance Directives
The heavy ratcheting lever and free-wheeling neutral knob offer positive control during structural plate fit-up. This heavy-tonnage manual lever hoist is not built for hoisting personnel, pulling over sharp unpadded beam edges, or using cheater pipes on the lever handle.
- Grade 80 load chain demands regular caliper checks for link stretch and wear gouges.
- Weston brake ratchet teeth and friction discs require dry brake function checks every 90 days.
- Internal drive gears and chain guide rollers require fresh extreme pressure grease every 6 months.
Commercial Warranty Factory Delivery Manifest
Atlas Lifting backs this heavy lever hoist with a 1-Year industrial warranty covering ratchet gears, brake discs, and forged hooks. The factory wooden crate manifest contains the assembled 6.3-ton lever hoist, 20-foot load chain, manufacturer test certificate, warranty card, and official operator rigging manuals.
Atlas Lifting and Rigging Specs
| Capacity (Ton) | 3 Ton |
| Capacity | 13890 lbs |
| Maximum Lift Height (ft) | 20 |
| A-Frame Design | No |
| Brand Name | Atlas Lifting and Rigging |
| Assembled Depth (in) | 8 |
| Assembled Weight (lbs) | 108.9 |
| Assembled Width (in) | 6.5 |
| ASTM B30.21 Compliant | Yes |
| Color | Orange |
| Country of Origin | China |
| Height (in) | 20.5 |
| Material | Steel |
| Maximum Load (lbs) | 13890 |
| Overall Length (in) | 240 |
| Package Contents | Hoist |
| Restrictions | CA Prop 65 |
| Towable | No |
| Warranty Type | 3 Years Limited |
| Weight (lbs) | 108.9 |
| Weight Capacity (lbs) | 13890 |
| MFG Part # (OEM) | ALH-063-20 |
| Product Condition | New |
| UPC | 810044341652 |
You must be logged in to post a review.

















Reviews
There are no reviews yet.