Atlas Lifting and Rigging ACH 20 Ton Chain Hoist 30 Ft. Lift with Overload Protection

Description

Position heavy machinery with Atlas Lifting and Rigging ACH overload-protected control when a 20-ton capacity and 30-foot lift are required. Experienced plant riggers gain extended vertical reach during bridge work, equipment relocation, and industrial construction, but can the long-chain system remain controlled when the overhead support is not engineered for the complete load? Its all-steel construction, powder-coated finish, sintered brake, blue grease, rotating hooks, and overload protection support heavy lifting within verified limits.

Model ACH-200-30-OP is listed with a 20-ton capacity, 30-foot lift, 44,000-lb maximum load, orange steel construction, premium powder-coated finish, high-performance blue grease, sintered braking, 360-degree hook rotation, and high-strength side plates. Atlas product-family data identifies ASTM B30.21 compliance and a 3-Year Limited Warranty. Confirm current dimensions, weight, chain arrangement, and nameplate capacity before installation or lifting.

Features of Atlas ACH

Bridge construction, energy facilities, machinery relocation, and heavy industrial maintenance require a chain hoist with long travel and positive load control. Qualified operators can use this ACH-200-30-OP configuration after evaluating the beam, hooks, chain path, load balance, clearance, and working load limit.

• 20-ton capacity supports compatible heavy machinery and structural assemblies.
• 44,000-lb maximum load is listed for the ACH-200 configuration.
• 30-foot lift reaches deep pits, high bays, and elevated work areas.
• All-steel construction supports the hoist body during demanding service.
• Premium powder-coated finish helps protect exterior surfaces during field exposure.
• Sintered brake construction supports controlled holding and lowering.
• 360-degree hook rotation helps align rigging connections with the load path.
• Overload protection provides an additional listed control feature for the OP model.

Load Test Capacity Control

No independent proof-load certificate, brake-holding measurement, chain elongation test, hook-throat measurement, operating-force value, or field telemetry was supplied. Do not treat 44,000 lbs as proof load or breaking strength. Confirm the current nameplate and manual. Shock loading, side loading, corrosion, uneven anchoring, and poor hook engagement can compromise the chain hoist and supporting structure.

Rigging Limits Service

The 30-foot lift, steel housing, sintered brake, rotating hooks, blue grease, high-strength side plates, and overload protection support extended industrial lifting. This chain hoist is not verified for personnel lifting, side-loaded hooks, shock loading, operation above the marked capacity, or suspended loads over personnel.

• Inspect the long load chain for stretch, twisting, corrosion, cracks, gouges, and damaged links.
• Check hooks, latches, brake parts, side plates, chain guides, and support structure.
• Protect chain storage from kinking and remove the hoist after abnormal braking.

Warranty Compliance Contents

Atlas ACH product information lists a 3-Year Limited Warranty and ASTM B30.21 compliance. Package contents should be confirmed because available data identifies the hoist without a complete accessory manifest. Verify current warranty terms, nameplate capacity, 30-foot chain, hooks, latches, operator manual, inspection certificate, and applicable OSHA requirements before commercial service.