Karcher BRC 30/15 C Compact Carpet Extractor with 10in Carpet Cleaning Path

Description

Scrub deep grease stains out of commercial carpets using the Karcher BRC 30/15 C Carpet Extractor. The ten-inch cylindrical brush agitates carpet fibers while high-pressure spray dissolves soil. It cleans hotel corridors fast but requires backward pull passes. A floating vacuum shoe recovers dirty solution to speed room turnover times.

Impact-resistant rotomolded polyethylene forms the four-gallon clean water tank and 4.5-gallon dirty recovery tank. A cast aluminum floor shoe houses the vacuum intake slot and brass spray jets. An electric diaphragm pump delivers 26 PSI solution pressure to commercial extraction nozzles. The unboxed extractor weighs 57 lbs, measuring 36 inches long, 14 inches wide, and 30 inches high.

Key Features of Karcher 1.008-058.0

Hotel maintenance managers buy Karcher 1.008-058.0 extractors to clean guest room corridors and banquet hall rugs. Professional commercial carpet extractor pricing accelerates carpet drying times to return rooms to service faster.

• Ten-inch cleaning path scrubs carpet fibers and recovers dirty wash water in single pull passes.
• Cylindrical scrubbing brush digs deep into carpet piles to dislodge ground-in dirt and hair.
• Twenty-six PSI solution pump forces cleaning detergent deep into carpet backing to dissolve stains.
• Two-stage vacuum motor pulls 120 inches of water lift to accelerate room dry times.
• Rotomolded polyethylene tanks withstand hard impacts against commercial door frames and furniture.
• Floating extraction shoe follows floor contours to maintain continuous suction across uneven slabs.
• Wide non-marking rear transport wheels roll over door thresholds and elevator gaps without scuffing.
• Detachable power cord simplifies machine storage inside compact janitorial closets.

Water Lift Pump Pressure Testing

Static vacuum testing demonstrates the two-stage motor produces 120 inches of water lift at the shoe intake. The diaphragm solution pump maintains 24 PSI continuous fluid pressure across two brass misting nozzles. Carpet moisture extraction tests show 86 percent of injected wash solution returns to recovery tanks in single passes. The rotating brush motor pulls 2.8 amps under heavy commercial pile drag.

Carpet Pile Pull Pass Cautions

Operating this 57-lb carpet extractor requires backward pulling technique that demands steady leg work on large floors. Do not buy this self-contained walk-behind unit to clean tight automobile interiors or narrow stair treads. Use specialized accessory hand wands for stairs. Empty dirty recovery water before foam reaches vacuum shutoff floats.

• Rinse out recovery tanks and vacuum intake mesh filters after every carpet cleaning job.
• Soak brass spray nozzles in white vinegar monthly to dissolve hard water mineral scale.
• Clean hair and carpet threads off the cylindrical brush roller after each work shift.

Factory Warranty Hardware Manifest

Karcher backs this carpet extractor with a 3-Year warranty on rotomolded tanks, 1-Year coverage on motors, and 1-Year on wear parts. The factory package contains one carpet extractor, a cylindrical scrub brush, an extraction shoe, and an instruction manual.