Advance SC800 34D 56112465 34″ Cordless Walk Behind Floor Scrubber with 310 Ah Wet Batteries, Charger, and Pad Holders – 25 Gallon, 24V, 270 RPM

Description

Rotomolded polyethylene tanks and welded steel chassis frames form the rugged structural foundation of this heavy-duty walk-behind machine. This Advance SC800 34D 56112465 34″ Cordless walk-behind floor scrubber cleans large industrial facilities using 310 Ah wet batteries. Operating at 270 RPM, this machine scrubs a 34-inch path with 25-gallon tanks. Operators must monitor water levels on schedule.

Extra-thick rotationally molded polyethylene forms the massive 25-gallon solution and 25-gallon recovery reservoirs, withstanding collisions with pallet racking. A reinforced steel frame carries the 24V 310 Ah wet battery bank, heavy-duty drive transaxle, and dual disc brush motors. Two 17-inch disc heads apply up to 170 lbs of down-pressure. The unit weighs 990 lbs with wet batteries.

Key Features of Advance SC800

Industrial plant managers buy Advance SC800 scrubbers to clean expansive manufacturing aisles with high solution capacity and high brush speeds. This commercial battery walk-behind disc floor scrubber provides 25-gallon tank volume and heavy scrub down-pressure across transport depots.

• Dual 17-inch disc scrub heads clean a 34-inch path at 270 RPM on commercial walk-behind scrubbers.
• Heavy wet deep-cycle 24V 310 Ah battery bank supplies up to 4.5 hours of continuous floor scrubbing.
• Large 25-gallon solution and 25-gallon recovery tanks maximize floor washing coverage between dump stops.
• Adjustable scrub down-pressure delivers up to 170 lbs of contact force for deep industrial floor stripping.
• Heavy cast aluminum 41-inch squeegee frame recovers dirty wash water on sharp commercial floor turns.
• Industrial drive transaxle propels the heavy scrubber across facility ramps at safe working speeds.
• External 24V industrial shelf charger restores wet battery power from standard 120V electrical outlets.

Automated Dyno Platform Load Telemetry

Technicians test every SC800 machine on our computerized test platform to measure brush motor current and transaxle draw under load. The 24V drive system propels the 990 lb machine at 3.5 MPH across simulated facility ramps without motor hesitation. The dual disc motors pull 36-Amps at 24V under maximum 170 lb down-pressure on test concrete. Vacuum airflow meters record 65 inches of water lift.

Operator Handling Field Directives Filter

Lower the scrub head and squeegee with the control levers, select forward drive, and press the drive paddles. Steer in smooth parallel lines across open commercial floors. Do not buy this heavy 990 lb walk-behind scrubber for small retail shops or multi-story facilities lacking industrial elevators.

• Flush the 25-gallon recovery tank and drain hose thoroughly with clean water after scrub passes.
• Check electrolyte water levels in the 310 Ah wet batteries each week on commercial floor scrubbers.
• Inspect the 41-inch curved squeegee rubber blades for tears to ensure streak-free water recovery.

Commercial Warranty Factory Delivery Manifest

This industrial scrubber carries a 3-Year warranty on parts, 2-Year warranty on labor, and an 8-Year warranty on rotomolded poly tanks. The wooden freight pallet contains the Advance SC800 34D scrubber, 24V 310 Ah wet battery set, shelf charger, two pad holders, and a detailed operator manual.