DK2 Samurai Winch Planetary Gear 9500lb with Synthetic Rope

Description

Pulling stuck recovery vehicles out of deep mud with a three-stage planetary gear system defines the DK2 Samurai 9500lb Planetary Winch. This 12-volt electric recovery winch pulls up to ninety-five hundred pounds using lightweight synthetic rope. It frees bogged trucks. The high-amp electric motor requires a heavy-duty automotive battery to prevent stall.

A cast aluminum gear housing houses the full-steel three-stage planetary gearset, mated to an extruded aluminum rope drum. The series-wound 12-volt DC motor generates 5.0 horsepower, drawing four hundred twenty full-load amps at maximum 9500-lb pull. The winch includes eighty feet of 3/8-inch synthetic rope and an aluminum hawse fairlead. Net winch weight sits at 58 lbs, measuring 21.3 inches long by 6.3 inches wide.

Key Features of DK2 S9500-SR

Commercial tow operators and off-road recovery teams buy DK2 S9500-SR winches to pull stuck service vehicles out of deep mud without handling sharp steel wire splinters. Commercial electric winch pricing delivers planetary gear stamina that pulls heavy trucks through steep washouts.

• Series-wound 5.0-HP motor delivers ninety-five hundred pounds of line pull force.
• Three-stage planetary gear system provides high mechanical torque and fast line speed.
• Synthetic rope eliminates frayed steel wire splinters and dangerous line whip energy.
• Automatic load-holding brake inside the drum secures vehicles on steep off-road inclines.
• Polished aluminum hawse fairlead guides synthetic rope without friction snagging or fraying.
• Waterproof 500-amp contactor switch handles heavy current without contact points welding shut.
• Handheld corded remote control operates line spooling from twelve feet away for operator safety.

Planetary Gearbench Pull Calibration

Bench dynamometer testing confirms the planetary drivetrain delivers 9,500 pounds of single-line pull on the first drum layer at 6.2 feet per minute while drawing 410 amps. No-load line speed clocks at 32 feet per minute at 65 amps. The internal mechanical brake holds full rated load without drum slip during power interruption tests. Motor temperature climbs thirty-two degrees Fahrenheit after three minutes of continuous pulling at seven thousand pounds. Synthetic rope elongation remains under 1.5 percent under peak working line tension.

Recovery Rigging Usability Maintenance Directives

The clutch freespool lever disengages with a quarter-turn to pull rope by hand to the anchor point. The corded remote provides positive trigger control from outside the cab. However, do not purchase this 9500-lb winch for commercial tow truck overhead hoists, crane lifting, or pulling loads exceeding rated capacity.

• Rinse mud and fine sand out of synthetic rope fibers with clean tap water after trail use.
• Inspect synthetic rope for chafing or cut strands before every recovery pull.
• Coat battery cable terminals once a month with non-conductive dielectric grease.

Factory Warranty Winch Manifest

DK2 backs this recovery winch with a 1-Year warranty covering electrical motor components and planetary gear mechanics. The heavy crate contains the S9500-SR winch, eighty feet of synthetic rope, aluminum hawse fairlead, corded remote, clevis hook, and official technical operation instruction manual.