Diteq Shibuya TS-165Pro Angle Base Core Drills with Carrying Case (2-Speed)

Description

Standard core rigs lack mast tilt adjustments, preventing technicians from drilling angled drain penetrations through thick concrete walls. The Diteq Shibuya TS-165Pro Angle Base core drill anchors securely to bore holes up to six inches in diameter at angles up to forty-five degrees. A two-speed electric drill motor drives precision gearing under mechanical carriage feed. Running diamond core bits dry without water flow melts matrix segments.

Precision-machined extruded aluminum mast columns mount onto a cast aluminum angle base supported by heavy locking pivots and four leveling screws. The carriage rides along ground steel gear racks using adjustable roller bearings that eliminate carriage play. The heavy drill motor wet-end features dual-insulated copper windings and internal slip clutches that decouple drive torque during core bit jams. Stainless steel water manifolds inject cooling water directly through the center spindle.

Angle Base Core Rig Specs

Tilting mast columns drill accurate angled holes up to 45 degrees for specialized mechanical drains. Precision rack-and-pinion feed handles permit smooth downforce control through tough concrete aggregate.

• 6-inch core bit capacity drills mechanical penetrations through reinforced concrete slabs
• Two-speed motor gearbox selects 700 RPM or 1400 RPM to match diamond bit diameters
• 45-degree tilting angle base allows precise angled penetrations through foundation walls
• Extruded aluminum mast column prevents carriage deflection during deep coring runs
• Four leveling jack screws stabilize the cast base plate across uneven concrete surfaces
• Integrated water swivel injects cooling water through the spindle center to flush concrete slurry
• Mechanical slip clutch protects internal gears from shock damage during rebar contact

Dynamometer Core Bench Telemetry

Bench testing quantifies electrical current draw and spindle torque across cured 5000 PSI reinforced concrete. The motor pulls 3.2 amperes unloaded, rising to 15.6 amperes while spinning a five-inch diamond core bit through concrete and rebar. Spindle speed drops from 700 RPM down to 610 RPM under firm carriage downforce. Output torque stabilizes at 36 foot-pounds during continuous coring passes. Sound level meters read 86 dBA at operator ear level. Gearbox oil temperatures rise 24 degrees Fahrenheit after two deep slab cores.

Field Service Operational Traps

Loose pivot clamp bolts allow the mast angle to slip during drilling, binding the diamond core barrel. Drywall contractors cutting plaster board have no use for this heavy core rig. Never operate this machine without securing the base with an anchor bolt.

• Tighten mast angle adjustment bolts to specified torque before beginning angled drilling passes.
• Flush the internal water manifold with clean water after finishing concrete coring jobs.
• Wipe abrasive concrete slurry off the aluminum mast column gear racks after every shift.

Commercial Warranty Package Inventory

Diteq backs this angle base core drill with a 2-Year limited warranty covering manufacturing defects. The carton includes the core drill motor, angle base mast column, carriage unit, water connection hose, wrenches, and heavy carrying case.