Collomix Double-Paddle Power Mixer Heavy Duty

Description

Single-paddle mixers introduce violent rotational counter-torque that strains worker wrists and pulls air bubbles into thick epoxy mortars. The Collomix Double-Paddle Power Mixer Heavy Duty blends high-viscosity structural compounds with zero operator counter-torque. A 13-ampere electric motor drives counter-rotating mixing paddles at 470 RPM. Feeding dry aggregate without adequate water will overheat motor windings.

Die-cast aluminum gearboxes house a dual-spindle planetary gear reduction system running inside synthetic grease chambers. The counter-rotating drive spindles cancel operational torque reactions completely, allowing effortless one-handed guiding through thick mixtures. The motor wet-end incorporates high-grade copper field coils coated in epoxy resin to resist abrasive dust contamination. Quick-coupling Hexafix fittings lock mixing paddles securely without loose chuck keys or adjustment wrenches.

Double-Paddle Mixer Hardware Specs

Counter-rotating paddles cancel rotational torque to eliminate wrist strain during thick structural grout blending. Quick-coupling Hexafix spindles permit tool-free paddle changes in seconds.

• 24-gallon batch capacity blends multiple bags of heavy mortar and structural epoxy grout
• 13-ampere 120-volt motor delivers continuous blending power through high-viscosity compounds
• Counter-rotating double paddle system eliminates rotational counter-torque on operator hands
• Hexafix quick-action coupling mechanism swaps mixing paddles without hand tools
• Electronic speed control trigger permits smooth starting without material splatter
• Ergonomic wraparound steel frame protects motor housings from jobsite drop impacts
• Planetary gear reduction unit multiplies motor torque for dense cementitious mixtures

Rotational Mixer Bench Telemetry

Bench testing evaluates electrical current draw and spindle torque across high-viscosity epoxy grouts. Free motor rotation draws 2.1 amperes at 120 volts, surging to 12.8 amperes while spinning twin paddles through dense cementitious mortar. Output spindle speed drops from 470 RPM down to 390 RPM under continuous mixing drag. Output torque stabilizes at 52 foot-pounds during thick compound blending. Decibel meters record 84 dBA under load. Gearbox casing temperatures climb 26 degrees Fahrenheit after three consecutive five-minute batches.

Field Service Operational Traps

Allowing mixed grout to cure on the paddle shaft places extreme eccentric loads on spindle bearings. Finish painters blending light latex paint have no use for this heavy-duty industrial mixer. Never submerge the motor housing into open mixing drums.

• Wash wet mortar and grout off mixing paddles with clean water immediately after use.
• Inspect the Hexafix quick-coupling sleeves for dried compound buildup before mounting paddles.
• Blow dry compressed air through motor ventilation slots every forty hours of use.

Commercial Warranty Package Inventory

Collomix protects this commercial mixer with a 2-Year limited warranty against manufacturing defects. The carton contains the double-paddle power mixer, one pair of MKD mixing paddles, Hexafix adapters, and comprehensive user instruction manual.