Baileigh DP-2012F-HD-V3 Floor Drill Press 220V 1 Phase 20in

Description

Running high-torque hole saws on 220V power cuts line amperage draw in half to prevent shop breaker nuisance trips. The Baileigh DP-2012F-HD-V3 Floor Drill Press clears wide 20-Inch workpieces using heavy-duty 220V 1-Phase motor power. You adjust speed across twelve pulley steps. Speed changes require manual V-belt repositioning across multi-step pulleys under the hinged top steel hood.

Heavy gray cast iron forms the slotted worktable and wide floor base, anchoring machine balance against high cutting torque. A 1.5-HP single-phase induction motor runs on 220V power, pulling 7.5 full-load amps to drive 12-Spindle speeds from 150 to 3000 RPM via dual V-belts. The 3-5/8-Inch ground steel column supports the rack-and-pinion table lift. The floor machine scales at 330 lbs, measuring 32 inches deep by 21 inches wide across its shop footprint.

Key Features of Baileigh DP-2012F-HD-V3

Structural fabricators buy Baileigh DP-2012F-HD-V3 drill presses to punch clean holes in heavy plate and broad channel steel. The twelve-speed belt range gives you the exact spindle rotation needed for small twist bits, large spade cutters, and hole saws.

• Dedicated 1.5-HP motor connects to 220V 1-Phase power for low electrical line heat on heavy cuts.
• Stepped V-belt transmission provides 12-Spindle speeds ranging from 150 to 3000 RPM.
• Wide 20-Inch work swing accommodates large structural weldments and broad metal brackets.
• Morse Taper 3 spindle socket seats heavy drill chuck arbors and taper-shank twist drills.
• Deep 4-3/4-Inch quill travel handles through-hole metal boring with repeatable depth stop pins.
• Heavy cast iron worktable rotates 360-Degrees and tilts 45-Degrees left and right.
• Front safety paddle switch features a removable lockout key to stop unauthorized shop startups.

Spindle Runout Bench Load Metrics

Precision dial test indicators verify total indicated runout (TIR) measures under 0.0010 inches at the Morse Taper 3 spindle nose. Drilling a 3/4-Inch hole in 1/2-Inch cold-rolled steel drops spindle speed from 380 free RPM to 360 loaded RPM under 220 lbs of manual downfeed downthrust. The 3-5/8-Inch column flexes under 0.0035 inches during heavy cutting passes. The TEFC motor casing maintains operating temperatures below 120 degrees Fahrenheit after 45-Minutes of continuous metal drilling cycles on shop test stands.

Shop Floor Handling Field Service

The three-spoke downfeed handles give you solid mechanical leverage across the entire 4-3/4-Inch quill stroke. Skip this floor machine for high-production CNC work or deep-hole gun drilling. The stepped pulley drive requires manual belt changes, and the 330-lb dead weight requires two workers to move across shop floors. Lock the table clamp handle before loading heavy stock.

• Wipe the precision ground cast iron table with paste wax monthly to block surface rust.
• Check V-belt tension every 3-Months and adjust motor bracket tension levers to stop slip.
• Lubricate the rack-and-pinion table lift gears every 6-Months with light machine oil.

Factory Warranty Standard Crate Manifest

Baileigh backs the DP-2012F-HD-V3 drill press with a 1-Year parts warranty covering manufacturer defects. The crated factory package delivers the floor column, cast base, 1.5-HP headstock, tilting worktable, 5/8-Inch keyed drill chuck, MT3 arbor, drift key, hardware pack, and an illustrated operator instruction manual.