Milwaukee M18 FORCE LOGIC 6T Latched Linear Utility Crimper (Bare Tool)

Description

Delivering six tons of hydraulic force inside a 3.2-inch wide profile, this inline tool fits between tight secondary conductors without snagging adjacent phases. The Milwaukee M18 6T Latched Linear Tool secures overhead distribution taps aloft. It speeds pole work, though this bare tool package excludes batteries, chargers, and W-dies.

High-impact glass-filled nylon forms the insulated body housing, paired with a forged alloy steel latched head that endures six tons of compressive force. Operating on an eighteen-volt brushless DC motor, the miniature pump produces 10000 PSI line pressure. The bare tool weighs 5.8 lbs unboxed, measuring 15.8 inches long by 3.2 inches wide by 4.5 inches high. A 340-degree rotating head aligns with angled conductors.

Key Features of Milwaukee 2979-20

Linemen looking to buy Milwaukee 2979-20 tools complete overhead service connections without dragging heavy hand lever tools aloft. Contractor equipment pricing reflects the six-ton linear frame, brushless motor efficiency, and Predictive Force Monitoring.

• Latched head slips into congested spaces without snagging adjacent secondary conductors.
• Generates six tons of hydraulic force to compress overhead taps and splices.
• Predictive Force Monitoring verifies target pressure on every single crimp cycle.
• Head rotates 340 degrees to align die faces with angled crossarm jumpers.
• Accepts industry standard W-style dies for utility distribution terminations.
• Brushless motor powers rapid compression cycles to reduce lineman bucket fatigue.
• Enlarged paddle trigger allows glove control while wearing rubber high-voltage gauntlets.
• Green LED ring gives instant visual confirmation of completed crimp cycles.

Six Ton Latched Pressure Diagnostics

Compressing 4/0 ACSR distribution sleeves in the latched head draws 9600 PSI hydraulic line pressure. Ram travel to full connector compression finishes in 2.6 seconds from paddle trigger pull. Latched gate deflection measures under 0.0015 inch under peak six-ton force. Predictive sensors verify target tonnage within two percent across one hundred test terminations. Hydraulic reservoir temperature remains cool, rising twelve degrees Fahrenheit after thirty cycles on outdoor utility staging benches without fluid weepage around the linear push rod seal during overhead distribution work.

Distribution Line Rigging Negative Filter

The slender linear barrel balances in one hand aloft, letting linemen steady conductors with the opposite hand inside bucket workspaces. The oversized paddle switch triggers through thick rubber insulation gloves, while visual signals confirm cycle completion. Do not buy this six-ton linear crimper for heavy underground transmission cable exceeding 4/0 AWG.

• Wipe conductive paste and road film off the latched head after each shift.
• Inspect the latch gate retention spring for positive return once a week.
• Clean the linear barrel casing with a clean cloth once a month.

Milwaukee Latched Tool Warranty Terms

Milwaukee protects this utility linear crimper with a 5-Year commercial manufacturer warranty. The factory package contains the bare 2979-20 linear crimper powerhead, wrist lanyard, protective rubber bumper boot, an alignment guide sheet, and the complete technical operator safety instruction manual booklet.