Perfect Aire 230V 18000 BTU Non-Energy Star Window Air Conditioner with Remote

Description

Slide the heavy-duty Perfect Aire 18000 BTU Conditioner into your exterior window frame to extract summer heat from large open offices and workshops. This non-Energy Star unit delivers high raw cooling capacity across 1,000 square feet. It requires a dedicated 230V 20-amp electrical receptacle, making it incompatible with standard 115V household wall outlets.

Galvanized sheet steel constructs the outer slide-out chassis cabinet, finished in corrosion-resistant baked enamel paint. The high-capacity rotary compressor draws 8.2 full-load amps on 230V 60Hz single-phase circuits, generating 18,000 BTUs of cooling. Total dry unboxed weight measures 112 lbs. The outer sleeve frame measures 26.5 inches wide, 26 inches deep, and 17.5 inches high to mount through exterior window openings.

Key Features of Perfect Aire 18000

Building superintendents buy Perfect Aire 18000 units to cool commercial workspaces, mobile offices, and multi-room suites through extreme heatwaves. Commercial pricing delivers maximum refrigeration tonnage without paying extra for complex inverter electronics.

• Heavy rotary compressors pump R32 refrigerant through aluminum condenser coils to deliver 18,000 BTUs of cooling.
• Non-Energy Star cooling circuits maximize continuous fan and compressor output for stubborn heat load environments.
• Slide-out chassis steel sleeves allow secure wall frame mounting before sliding in the heavy mechanical core.
• Handheld wireless remote controls include follow-me room temperature sensors to regulate comfort from across the room.
• Three-speed blower fan wheels move 450 CFM of chilled air through four-way directional louver grilles.
• Washable front nylon mesh air filters catch airborne dust and lint for fast cleaning under tap water.
• Digital electronic thermostat touchpads feature 24-hour on-off timers, auto sleep cycles, and dehumidification modes.

Refrigeration Thermal Runout Bench Metrics

Bench testing inside 95-degree Fahrenheit ambient heat with 50 percent relative humidity shows output air dropping to 51 degrees at the front louver face. The rotary compressor draws 8.0 running amps on 230V line current under maximum cooling demand with zero breaker trips. High-speed blower testing measures 450 CFM, throwing a defined cold air stream thirty feet out into the test bay. Sound meter tests record 58 dB on low and 62 dB on high at ten feet. Moisture removal rates extract 4.8 pints per hour.

Window Mounting Usability Realities

Installing this 112 lb chassis takes two workers to slide the mechanical core into the pre-mounted exterior window sleeve. Sill support brackets must anchor firm into structural wall studs. Do not buy this 230V unit for standard 115V wall plugs, vertical sliding casement windows, or RV applications.

• Wash the front nylon mesh air filter under warm sink water every two weeks.
• Inspect outdoor aluminum condenser fins and straighten bent fins with a comb each year.
• Clean leaves and street grit out of the bottom sleeve drain ports each season.

Factory Warranty Manifest Inclusions

Perfect Aire covers this window air conditioner with a 1-Year full replacement warranty on the complete chassis. The factory shipping box contains the slide-out mechanical chassis, exterior steel window sleeve, mounting bracket kit, wireless remote control, foam insulation panels, and an illustrated installation manual.