IMER Spin Max 120V 1.75 HP 3 Cu Yd/Hr Continuous Concrete Mixer

Description

Solid abrasion-resistant cast polyurethane mixing paddles and heavy steel barrels withstand continuous gravel flow without premature wear. The IMER Spin Max Continuous Mixer uses a 1.75-HP electric drive to churn three cubic yards of concrete per hour. Contractors pour slabs fast. Running without steady water input will cause aggregate to pack inside the tube.

Wear-resistant structural steel forms the dry feed hopper and mixing chamber to handle constant aggregate friction. A totally enclosed fan-cooled 1.75-horsepower electric motor operates on 120V single-phase current drawing 14.5 full-load amps. A direct-drive reduction gearbox spins the polyurethane paddle auger shaft without belts or pulleys. Two flat-free tires roll on a tubular steel chassis. Net machine weight sits at 265 lbs with dimensions measuring 29 inches wide by 68 inches long by 46 inches high.

Key Features of IMER 1106200

Commercial masonry and concrete crews buy IMER 1106200 mixers when commercial concrete mixer pricing requires high-volume continuous output on standard power. This machine mixes bagged concrete, structural grout, masonry mortar, and self-leveling underlayments.

• Continuous mixing chamber produces up to three cubic yards of material per hour.
• Totally enclosed 1.75-horsepower electric motor runs on standard 120-volt twenty-amp circuits.
• Direct reduction gearbox eliminates belts, pulleys, and exposed drive chain maintenance.
• Cast polyurethane mixing paddles withstand abrasive sand and aggregate scour without chipping.
• Integrated water manifold meters exact fluid flow to guarantee uniform batch consistency.
• Flat-free transport wheels roll across gravel, sand, and rough construction jobsites.
• Safety interlock switch stops auger rotation when the operator lifts the hopper grate.

Continuous Auger Bench Torque Diagnostics

Bench testing confirms auger shaft speeds hold at 55 RPM under continuous bag feeding at two bags per minute. Motor current draws 13.2 amps during standard stone concrete churning, peaking at 15.1 amps under stiff mortar feed. Motor shell temperatures level off at 140 degrees Fahrenheit after ninety minutes of non-stop operation. The polyurethane paddle blades show zero edge chipping under gravel impact. The water flow regulator maintains set pressure within 0.5 PSI during varying source pressure tests.

Continuous Feed Usability Upkeep Procedures

The low hopper height lets tenders dump dry bags across the bag splitter without shoulder strain. Continuous discharge drops fresh mud straight into grout pumps or wheelbarrows without stopping. Do not buy this machine for bulk aggregate gravel mixing without pre-blended dry bags.

• Flush the mixing chamber with water for three minutes right after stopping.
• Remove the paddle shaft to clean residual cement buildup each work week.
• Inspect the water flow meter for mineral scale deposits each month.

Factory Warranty Unit Package Scope

IMER covers this continuous mixer with a 1-Year manufacturer warranty against mechanical and electrical defects. The factory carton includes the complete Spin Max mixer, polyurethane paddle auger, water flow control manifold, washdown hose kit, flat-free transport wheels, and printed technical operator instruction manuals.