Justrite 745 Gallon Spill Drive Over Berm 10 ft x 10 ft x 12 in Black

Description

Fuel tanker trucks and service utility vehicles leak fluids during routine jobsite transfers. The Justrite 745 Gallon Spill Drive Over Berm provides passive vehicle access with high-volume secondary containment. Turning vehicle steering wheels while tires sit stationary on the entrance foam will tear the exterior PVC protective jacket.

High-tensile PVC-coated polyester fabric forms the liquid-tight containment reservoir, providing resistance to aromatic hydrocarbons, motor oils, and antifreeze. The drive-through perimeter integrates crush-resistant closed-cell polyethylene foam ends that compress under wheel loads and spring back to 12 inches. Rigid interior wall supports secure the side barriers. Spinning drive wheels with aggressive tire chains on the entrance ramp will slice the outer protective membrane.

Drive Through Containment Specifications

Fleet fluid staging requires drive-in access without sacrificing vertical wall retention volume. Teardown inspections reveal heavy industrial fabric construction paired with high-memory foam barriers.

• 745-gallon containment capacity captures catastrophic fluid dumps from commercial service trucks.
• 10-foot by 10-foot working area fits utility trucks, mobile lube skids, and fuel trailers.
• 12-inch high collapsible foam entry walls permit vehicles to drive straight into the basin.
• High-memory closed-cell foam cores rebound to full height without manual reset work.
• Heavy-duty PVC-coated polyester fabric resists corrosive diesel fuel and hydraulic fluid leaks.
• Radio-frequency welded lap seams provide 100 percent fluid retention under static head pressure.
• Exterior perimeter anchor grommets secure the berm against high-wind displacement on open ground.

Drive Over Stress Telemetry

Vehicle drive-over fatigue testing documents that the 12-inch foam end walls endure 600 truck passes without core compaction or seam separation. Hydrostatic pressure retention at maximum 745-gallon fluid levels shows zero seam weeping over 96 hours. Fabric tensile tests record 380 pounds of puncture resistance against dull metal probes. Chemical resistance evaluation with SAE 30 motor oil at 115°F produces no coating softening after four weeks of submersion. Side wall brackets resist 18 MPH lateral wind loads without wall collapse.

Drive Through Service Directives

Fleet maintenance supervisors, highway paving crews, and equipment rental yards require this drive-over containment system. Do not use this berm for tracked crawler dozers with sharp steel grouser bars that chew up foam cores. Driving vehicles across sidewalls at speeds above 5 MPH will distort internal foam blocks.

• Sweep dirt and sharp aggregate off the drive-over foam ramps after each transfer shift.
• Evacuate captured fuel spills within two hours using an approved air diaphragm pump.
• Inspect bottom fabric for gouges before folding the unit for storage.

Commercial Warranty Package Inventory

Justrite backs this 745-gallon drive-over berm with a 1-Year commercial limited warranty against material and weld seam defects. The shipment contains one complete 10-foot by 10-foot by 12-inch QuickBerm with foam end walls, side support brackets, fabric repair kit, and an installation manual.