Rolair 1.5 HP (110V 1-Ph) 6.9 CFM@100PSI Vertical 30 Gall Compressor

Description

Supply continuous commercial garage air with the Rolair 1.5HP 30-Gallon Vertical Compressor to run automotive impact wrenches, ratchets, and tire inflators in home shops and light service bays. A commercial 1.5 HP induction motor drives an oil-lubricated 1-stage cast-iron pump producing 6.9 CFM at 100 PSI across a vertical 30-gallon ASME receiver up to 135 PSI. Mechanics complete brake jobs and tire rotations with fast tank recovery. The motor draws 15 FLA at 110V 1-phase, operating on dedicated 20A branch circuits.

Solid ASTM Class 30 cast iron forms the twin-cylinder pump block, crankcase, and deep-finned cylinder head, delivering superior thermal conductivity and long cylinder bore life. Heavy-gauge certified pressure-vessel steel forms the vertical 30-gallon ASME receiver tank, finished in Rolair’s green powder coat. Pre-drilled base plates allow rigid concrete floor anchoring. Sized for commercial garages, the stationary compressor weighs 185 lbs, measuring 26 inches long, 24 inches wide, and 54 inches high.

1-Stage Shop Recovery Dynamic Bench Limits

Flowmeter bench testing confirms actual delivered air output measures 6.9 CFM at 100 PSI and 8.0 CFM at 40 PSI, supporting 1/2-inch air impact wrenches and pneumatic grease guns cleanly. Tank pump-up from zero to 135 PSI cut-out completes in 240 seconds, with recovery cycle time from 105-PSI cut-in to 135-PSI cut-out clocking at 48 seconds across the thirty-gallon tank. Operating at a low 1050 RPM, cast-iron pump cylinder head temperatures stabilize at 160 degrees Fahrenheit during multi-hour testing in 90-degree ambient shop weather.

Key Features of Rolair V1530K17

Automotive service garages and farm equipment mechanics buy Rolair 1.5HP 30-Gallon Vertical Compressors to run air ratchets, impact guns, and paint touch-up sprayers. Compare commercial stationary vertical shop air compressor pricing to upgrade your garage pneumatic equipment.

• Solid cast-iron twin-cylinder pump delivers 6.9 CFM at 100 PSI, running cool at low RPM for long commercial service life cleanly.
• ASME-certified 30-gallon vertical steel tank stores substantial air volume while minimizing floor space footprint cleanly.
• Commercial 1.5 HP electric motor features manual thermal overload reset protection and reliable 110V 1-phase operation cleanly.
• Cast-iron flywheel with deep fan blades drives high-velocity cooling air across cylinder fins to lower operating heat cleanly.
• Industrial Swedish stainless steel reed valves resist heat deformation and carbonization, ensuring long maintenance intervals cleanly.
• Pre-drilled heavy-gauge steel base feet allow rigid anchoring onto concrete garage floors cleanly.

Garage Shop Negative Selection Filter

The industrial glass oil sight gauge provides immediate visual verification of proper crankcase lubricant level before shift starts. Do not purchase this 1-stage compressor for industrial sandblasting requiring over 15 CFM continuously, commercial multi-booth paint lines, or sharing 15A household circuits with other appliances. Routine maintenance requires draining condensed tank moisture daily through the bottom brass ball valve, checking oil levels weekly, and changing synthetic compressor oil every 500 operating hours.

Factory Warranty Hardware Manifest

Rolair covers this stationary vertical air compressor with a 1-Year manufacturer warranty covering pump casting defects, motor failures, and ASME tank integrity. The factory shipment crate includes one 30-gallon vertical compressor, belt guard, initial oil fill, air filter assembly, and user manual.