Ingersoll Rand UP Series TAS Rotary Screw Air Compressor 10HP 230v

Description

Run continuous manufacturing machines with the Ingersoll Rand 10HP TAS Compressor to supply 34 CFM of bone-dry compressed air without line pressure dropouts across multi-shift production plants. The ten-horsepower rotary screw air end pairs with an integrated refrigerated cycling air dryer, producing 34 CFM at 150 PSI across an 80-gallon ASME receiver. Production facilities eliminate pneumatic valve sticking and moisture freeze-ups. The complete air center draws 28 FLA at 230V three-phase power, requiring commercial electrical disconnect switches.

Key Features of Ingersoll Rand UP6-10TAS-230

Machine shop managers and automated assembly plants buy Ingersoll Rand 10HP TAS Rotary Screw Compressors to deliver continuous dry air to CNC machinery. Compare commercial rotary screw air compressor pricing to upgrade plant pneumatic systems.

• Continuous 100-percent duty cycle rotary screw air end delivers 34 CFM at 150 PSI without pulsation or reciprocating valve fatigue cleanly.
• Integrated refrigerated cycling air dryer chills discharge air to 38 degrees Fahrenheit, stripping out destructive line water cleanly.
• Whisper-quiet sound enclosure dampens operational noise down to 69 dBA, allowing installation directly on active plant floors cleanly.
• ASME-certified 80-gallon horizontal air receiver tank buffers high-volume pneumatic demand spikes from multi-axis CNC machines.
• Spin-on air and oil separator cartridge cuts oil carryover below 3 PPM, safeguarding sensitive pneumatic equipment from oil contamination.
• Pre-wired microprocessor control panel monitors discharge pressure, operating hours, and maintenance intervals cleanly.

Precision-machined ductile iron rotor lobes rotate inside a heavy cast iron stator housing, supported by heavy-duty angular contact roller bearings that resist radial thrust loads. A totally enclosed fan-cooled TEFC electric motor drives the poly-V serpentine belt drivetrain, shielding internal copper windings from ambient plant dust. An integrated refrigerated air dryer chills discharge air to a 38-degree Fahrenheit dew point. Sized for plant equipment pads, the stationary air center weighs 1058 lbs, measuring 71x29x53 inches.

Dew Point Refrigeration Bench Limits

Flowmeter validation per ISO 1217 Annex C confirms actual Free Air Delivery measures 34 CFM at 150 PSI and 38 CFM at 125 PSI across continuous duty cycles. The integrated refrigerated cycling dryer maintains a stable 38-degree Fahrenheit pressure dew point under full-load conditions. Internal sound attenuation panels reduce operational noise down to an ultra-quiet 69 dBA at one meter distance. Internal spin-on air and oil separator elements keep oil carryover under 3 PPM.

CNC Machine Shop Negative Filter

The electronic microprocessor controller displays discharge air pressure, operating hours, and service interval alerts on a clear digital screen. Do not purchase this three-phase industrial rotary screw compressor for single-phase 115V or 230V residential garages, portable trailer mounting, or intermittent framing nailer applications requiring under 10 CFM.

• Spin off the oil filter and air separator cartridge every 2000 operating hours to maintain low oil carryover ratings.
• Sample synthetic rotary lubricant fluid every 1000 operating hours to check viscosity and acid number levels.
• Clean dust off the air and oil cooler radiator fins monthly using compressed air to prevent thermal high-temperature shutdowns.

Factory Warranty Delivery Manifest

Ingersoll Rand covers this rotary screw compressor with a 1-Year limited warranty, extendable to a 5-Year air end warranty upon registering with factory start-up synthetic lubricant kits. The delivery shipment contains one 80-gallon horizontal rotary screw compressor with integrated dryer, initial synthetic oil charge, and technical service manual.