Nilfisk-Alto Attix 33-01 InfiniClean Vacuum

Description

Extract continuous masonry dust clouds without stopping to clear plugged filter pleats. The Nilfisk Attix 33-01 InfiniClean Vacuum uses automated reverse-pulse airflow with a 1,000W bypass motor to generate 148 CFM and 92in water lift. Its 8gal collection tank requires regular disposal breaks on heavy drywall sanding jobs, yet suction never drops during long shifts.

The tank shell features impact-resistant polypropylene supported by a rigid steel caster chassis. A single 120V bypass motor draws 8.5 FLA at 1,000W on standard 60Hz single-phase circuits. Air seals isolate the motor turbine against abrasive dust bypass. Net unboxed weight reaches 32 lbs. Base dimensions measure 22.2in long by 15.2in wide by 20.5in high, rolling on 2 heavy front swivel casters and 2 solid rubber rear wheels.

Key Features of Nilfisk Attix 33-01

Concrete contractors buy Nilfisk Attix 33-01 units to maintain compliance during indoor surface preparation and tuckpointing passes. Realistic commercial pricing positions this commercial dust extractor as an essential asset for masonry refinishers.

• InfiniClean automatic filter cleaning pulses reverse air every 15 seconds to purge fine particulate from the filter.
• PTFE washable non-stick flat filter captures 99.9% of dust down to 0.3 microns.
• High-efficiency 1,000W motor delivers 148 CFM airflow and 92in static water lift.
• Sealed motor chamber holds operational noise levels at 60 dB to prevent ear strain in enclosed rooms.
• Impact-modified 8gal canister features smooth internal walls for fast debris dumping into disposal bags.
• Anti-static container inlet grounds the suction path to prevent static shocks during composite sanding.
• Heavy steel latches clamp the motor dome down tight against the tank rim perimeter gasket.

InfiniClean Pulse Airflow Test Data

Bench tests confirm 148 CFM free air volume and 92in static water lift at the canister collar. When loading 10 lbs of silica powder into the tank, the InfiniClean pulse mechanism maintains static pressure within 4% of baseline. Electrical current draw holds at 8.5A on 120V circuits under maximum restriction. Operating sound checks in at 60 dB under full load. Exhaust air discharge temperature measures 126°F after 60 minutes of unbroken operation, proving internal bypass fan cooling stability.

Jobsite Handling Filter Maintenance Protocol

The oversized rotary switch turns between manual run and pulse modes with gloved fingers. Do not buy this machine for commercial flood dredging or deep basement pumping because high fluid volume overwhelms the flat panel filter frame.

• Inspect the PTFE flat filter cartridge every 50 hours of dry drywall sanding and rinse if blinded.
• Clean the rubber tank rim gasket with a dry shop rag before every motor latch down.
• Blow out the motor exhaust vents with clean 30 PSI compressed air every 100 service hours.

Standard Warranty Shipping Manifest Details

Nilfisk backs the Attix 33-01 with a 2-Year commercial warranty covering motor and electrical switches. The shipping carton contains the 8gal vacuum unit, flat PTFE filter, 1-1/4in by 13ft anti-static hose, curved chrome wand, 2 extension tubes, industrial floor nozzle, and user manual.