Nilfisk ATTIX 30-21 PC 8 Gallon Wet / Dry Vacuum with 8-Piece Tool Kit – 120V

Description

Connecting dust collection to handheld power tools requires automatic motor switching without tripping shop breakers. The Nilfisk ATTIX 30-21 PC 8 Gallon pairs an auto-start tool socket with an industrial 120V motor pulling 135 CFM and 92-inch water lift. The 8 Gallon drum fills fast during major liquid spills, requiring constant work stops to dump the container.

Dense composite resin forms the 8 Gallon canister, resisting wall stress cracks from repeated jobsite drops and impact shocks. An internal sensor circuit watches the onboard power tool socket, firing the vacuum motor when the operator starts a connected tool. Acoustic baffling dampens motor resonance, dropping sound emissions without restricting airflow paths through the turbine. Isolated bypass cooling directs clean room air over the copper commutator, preserving motor brushes during dusty cutting runs.

Tool Triggered Hardware Matrix

Carpenters and solid-surface fabricators deploy this vacuum for point-of-cut dust capture on saws, sanders, and routers. Solid-state switching circuitry provides reliable automated operation across long work shifts.

• Auto-start power receptacle starts and stops the vacuum in sync with connected electric hand tools
• 8 Gallon structural composite tank withstands severe jobsite impacts without structural deformation
• 120V commercial motor pulls 135 CFM and 92-inch water lift for deep dust shroud evacuation
• SilentPower acoustic engineering keeps operating sound pressure down to 59 dBA for quiet shop operation
• Push-and-Clean filter cleaning system dislodges dust cakes using high-velocity reverse air pulses
• Washable PET fleece filter media captures 99.9% of fine shop dust down to 1 micron
• 8-Piece expanded tool kit includes antistatic hose, aluminum tubes, floor tools, and power tool adapters

Motor Load Thermal Telemetry

Continuous extraction testing on 120 Volt service registers a 9.3 Amp motor draw without auxiliary tools active. Motor head casing temperatures increase by 37°F over room ambient after 50 minutes of tool dust extraction. Exhaust air temperature reads 118°F during sustained high-vacuum operation. Suction loss measures 8-inch water lift through a standard 10-foot antistatic hose. Sound pressure levels register 59 dBA at 10 feet under open intake, climbing to 64 dBA under full vacuum seal.

Field Restrictions Service Protocol

The 22-pound dry weight transfers between jobsites with minimal strain, but the plastic container can slide around in slick metal pickup beds. Disaster recovery crews pumping out flooded basements must pass on this model, as the 8 Gallon basin lacks continuous discharge pumping. Vacuuming smoldering coals or live welding sparks will ignite the internal fleece bag and warp the plastic tank.

• Pulse the filter cleaning button three times at each sandpaper change to maintain maximum water lift
• Inspect the auto-start electrical outlet for moisture contamination or physical pin wear once per month
• Wash the PET filter element with cool tap water and dry to a crisp finish before reinstallation

Warranty Protection Unboxed Hardware

Nilfisk supports this vacuum with a 2-Year commercial warranty covering motor and electrical parts. The unboxed container delivers the ATTIX 30-21 vacuum, PET fleece filter, 10-foot antistatic hose, aluminum extension tubes, commercial floor nozzle, crevice tool, universal power tool adapter, and fleece dust bag.