Makita 40V MAX XGT GCV02PMX 2.1 Gallon Lithium Ion Cordless Brushless Dry Dust Extractor / Vacuum Kit with HEPA Filtration and AWS Capability – 4.0 Ah

Description

Trailing power cords across busy framing jobs creates trip hazards and trips temporary site breakers. The Makita 40V MAX XGT GCV02PMX cordless dry vacuum kit captures dangerous construction dust within a 2.1-gallon canister. It operates on 40V max XGT battery power. Demanding continuous concrete planer grinding drains twin batteries before midday lunch breaks without extra charged packs.

The lower bucket uses thick-wall antistatic composite resin built to endure gravel hits and truck bed bounces. Power flows from a high-output brushless motor straight to an engineered suction turbine without carbon brush wear. Cast metal latches compress a thick nitrile perimeter seal to lock vacuum pressure inside the chamber. The HEPA filter mounts against an internal shaker cage, while a specialized radio cavity houses the wireless tool communication chip.

Cordless Dust Extractor Architecture

Battery operation frees technicians from wall outlets while maintaining OSHA Table 1 silica compliance. The modular base rolls across jobsite rubble on heavy composite wheels.

• 40V max brushless motor produces 148 CFM for aggressive debris extraction.
• Auto-Start Wireless System links to compatible cordless power tools via Bluetooth signals.
• Dual-stage HEPA filter system blocks 99.97 percent of microscopic silica particles.
• 2.1-gallon dry capacity tank unhooks with two quick-release side latches.
• Stepless speed dial controls suction power to conserve battery amp-hour capacity.
• Antistatic 1-1/2-inch hose prevents electric static shock during masonry surfacing.
• Onboard storage caddy secures nozzles and spare batteries during truck transit.

Dyno Telemetry Electrical Realities

Full-throttle testing pulls 27.5 Amps from the 40V max battery pack during heavy surface grinding. Air velocity clocks at 145 CFM through an open port, generating 91 inches of static water lift. Sound measurement reads 65.5 dBA at 1 meter on maximum suction. Motor core temperatures increase by 33°F after exhausting one 4.0 Ah battery, stabilizing around 128°F. Run time on speed setting five reaches 28 continuous minutes per 4.0 Ah charge.

Jobsite Handling Service Directives

At 18.3 pounds with battery, this extractor rolls over plywood decking seams on wide rear wheels. Do not assign this machine to suck up standing rainwater, oil leaks, or wet grout slurry. Ingesting liquids destroys the dry paper HEPA elements and causes severe corrosion on the brushless motor rotor.

• Inspect the hose antistatic ground wire continuity every 60 days.
• Clear the pre-filter mesh wrap after dumping each full bucket of drywall dust.
• Clean battery terminal blades with dry compressed air after every shift.

Makita Warranty Shipping Manifest

Makita protects this extractor with a 3-Year warranty on the tool body, rapid charger, and 40V max batteries. The unboxing package contains the GCV02 vacuum, two 4.0 Ah lithium-ion batteries, a dual-port rapid charger, a 1-1/2-inch antistatic hose, an AWS module, and three HEPA filter bags.