Makita 18V X2 (36V) LXT Corded 2.1 Gallon HEPA Dry Dust Extractor Vacuum (Bare Tool)

Description

Switch between cordless battery freedom and unlimited wall plug runtime at the flip of a selector dial. The Makita XCV04Z Hybrid Dust Extractor runs on 2 18V LXT batteries or 120V AC corded power to pull 127 CFM and 96in water lift. Its 2.1gal container demands frequent bag changes on large demolition sweeps.

The collection canister incorporates impact-resistant ABS polymers with an onboard cord wrap bracket. A hybrid motor system accepts 120V AC corded input pulling 9.2 FLA or 36V DC power from 2 18V LXT batteries. Sealed motor bearings block fine gypsum dust. Bare tool weight is 21.8 lbs without batteries. Base dimensions measure 18-1/2in long by 14-3/4in wide by 14-1/2in high, rolling on 4 multi-directional swivel casters with dual rear wheel stops.

Key Features of Makita XCV04Z

Remodeling contractors buy Makita XCV04Z hybrid units to run continuously on generator power during drywall sanding then switch to batteries for quick punch-list sweeps. Realistic commercial pricing positions this commercial hybrid dust extractor as a practical jobsite platform.

• Hybrid power architecture operates on 120V AC corded power or 2 18V LXT lithium-ion batteries.
• AC operation delivers 127 CFM airflow and 96in static water lift for heavy collection.
• DC battery operation produces 74 CFM airflow and 36in water lift for agile remote tasks.
• Certified HEPA filtration system captures 99.97% of fine particles down to 0.3 microns.
• Variable speed control dial matches motor suction to specific power tools and tasks.
• Oversized power switch with rubber boot allows simple operation with heavy work gloves.
• Quick-release canister latches dump 2.1gal of dry debris into disposal bags in seconds.

Hybrid Suction Pressure Benchmark Tests

Flow bench tests confirm 127 CFM airflow and 96in of water lift on 120V corded power. Under dual 18V 5.0Ah battery power, the unit produces 74 CFM airflow and 36in water lift for 30 minutes of continuous runtime on high. Sound output checks in at 75 dB on corded power and 64 dB on battery power. Motor housing temperatures stabilize at 122°F after 60 minutes of corded drywall sanding. Current draw pulls a steady 9.2A on 120V circuits under full suction load.

Field Handling Filter Care Procedures

The AC/DC power selector toggle turns with positive clicks through heavy work gloves. Do not buy this hybrid dry extractor for standing flood recovery or plumbing leaks because moisture destroys the dry HEPA filter and damages internal AC/DC switching transformers.

• Clean the pleated HEPA filter cartridge with 30 PSI clean compressed air every 20 hours.
• Empty the 2.1gal collection tub and replace the plastic liner before dust reaches the inlet baffle.
• Inspect the power cord sheath and plug prongs for cuts or bending every 30 shop days.

Bare Tool Warranty Package Manifest

Makita covers this bare hybrid extractor with a 3-Year limited warranty against defects in materials and workmanship. The shipment package includes the XCV04Z bare hybrid vacuum, 1-1/2in by 11.5ft anti-static hose, HEPA filter cartridge, plastic disposal bag, detachable 16ft AC power cord, crevice tool, and user instruction manual.