Karcher NT 68/1 1.103-494.0 18 Gallon Wet / Dry Vacuum with 24″ Front-Mounted Squeegee and Tool Kit

Description

Slurry recovery slows down when wide warehouse floor stripping jobs require dragging small floor wands over thousands of square feet. The Karcher NT 68/1 1.103-494.0 18 Gallon Wet / Dry Vacuum with 24″ Front-Mounted Squeegee and Tool Kit recovers dirty water fast with a front-mounted squeegee. It holds 18 Gallons under 1200 Watt power. Emptying full liquid loads requires using the drain hose.

The recovery canister uses impact-resistant rotational-molded polyethylene that resists caustic floor strippers and harsh chemical wash. A commercial 1200 Watt bypass suction motor routes moist tank air away from electrical motor windings to prevent internal short-circuits. The mobile cart features tubular steel construction with large rear wheels mounted on a solid steel axle and an integrated front squeegee mounting bracket.

Front Mounted Wide Path Squeegee Platform

The integrated 24-inch front squeegee recovers dirty scrub water in continuous forward walking passes without dragging hand wands. Foot pedal lift levers raise the squeegee assembly fast when crossing door thresholds.

• 18 Gallon rotomolded poly tank provides extended water pickup capacity before tank dumping is required.
• 1200 Watt commercial bypass vacuum motor produces 80 inches of waterlift suction for slurry recovery.
• 24-inch front-mount squeegee recovers wet slurry along wide warehouse aisles in single continuous passes.
• Rear drain hose allows operators to empty dirty wastewater straight into floor drains without heavy lifting.
• Foot pedal squeegee lift raises the blade mechanism to clear carpet transitions and doorway thresholds.
• Complete contractor tool kit includes a 10-foot hose, metal wands, floor squeegee, and crevice tool.
• Large 10-inch rear transport wheels roll over electrical cords, hoses, and floor drains with low drag.

Vacuum Motor Airflow Bench Telemetry

Pulling continuous water slurry through the 24-inch squeegee draws 10.0 Amps from a standard 120 Volt circuit. Vacuum motor casing temperature stabilizes at 134°F after 45 minutes of non-stop floor stripping recovery. Tank waterlift holds rock-solid at 80 inches of suction under full fluid seal. Operating acoustic sound output measures 71 dBA measured five feet from the tank.

Floor Restoration Scope Maintenance Protocols

Janitorial contractors, concrete polishers, and flood remediation crews recover slurry fast with this front-squeegee vacuum. Do not vacuum flammable solvents, gasoline, or toxic fuel spills because electric motor sparks will cause fire. Never operate in wet pickup mode without verifying that the internal float shutoff moves free.

• Rinse the internal recovery tank and drain hose with clean water after each floor stripping job.
• Wipe down the front squeegee rubber blades and flip blades to fresh edges when edges wear round.
• Clean the cloth dry-vacuum filter element and wash the wet foam shutoff screen each week.

Equipment Guarantee Commercial Delivery Manifest

Karcher backs this commercial vacuum with a 3-Year commercial warranty covering the vacuum motor, tank, and cart frame. The package arrives with the 18 Gallon vacuum, 24-inch front squeegee, 10-foot hose, two wands, squeegee floor tool, and crevice nozzle.