Edco Replacement Filter for VAC-200

Description

Maintain maximum dust collection suction on concrete scarifiers while preserving OSHA Table 1 silica compliance. The Edco VAC-200 Replacement Filter installs inside industrial vacuum tanks to stop microscopic respirable dust particles. Operating with torn or saturated filter media causes motor bearing abrasion, inducing vacuum turbine failure within forty hours of concrete grinding work.

Micro-pleated synthetic media bonds to heavy-gauge polyurethane end caps reinforced with an internal steel expansion mesh core. Engineered for Edco VAC-200 industrial dust collectors, it filters up to 200 CFM airflow under extreme particulate loads. The dry replacement filter weighs 2.8 lbs, presenting physical filter cartridge dimensions measuring 12in high, 9-1/2in outer diameter, and 5-1/4in inner core diameter.

Key Features of Edco ED20091

Concrete surface contractors buy Edco ED20091 replacement filters to maintain high suction on heavy concrete scarifiers and floor planers. Direct cartridge pricing allows concrete restoration companies to stock spare filtration elements and avoid jobsite downtime.

• Certified micro-pleated media traps respirable silica dust down to 0.5 microns at 99% efficiency.
• Heavy steel support mesh prevents pleat collapse under high static vacuum suction pressures.
• Molded polyurethane sealing gaskets form an airtight vacuum seal against the collector housing rim.
• High-porosity synthetic surface layer sheds fine masonry dust during manual filter shaker pulses.
• Direct fit configuration drops into Edco VAC-200 dust collectors without modifications or adapter rings.
• Extended surface area design maintains continuous 200 CFM airflow through heavy surface grinding passes.
• Washable media construction permits light water rinsing to extend service longevity between dry replacements.

Filtration Media Airflow Bench Verifications

Differential pressure bench tests show clean initial air resistance measuring 1.1in water column at 200 CFM rated flow. Particle count sensors confirm 99.1% retention efficiency on 0.5-micron fine silica dust test particles. Cartridge collapse testing proves structural stability up to 105in water lift vacuum pressure without pleat deformation. Filter core airflow restriction climbs to 3.6in water column after four hours of heavy concrete grinding dust capture. The media withstands operating air stream temperatures up to 160°F.

Cartridge Installation Scheduled Filter Servicing

The molded rubber sealing lip seats against the metal vacuum bracket with 10 lbs downward hand pressure, forming an airtight compression seal. Do not buy this replacement filter cartridge for wet liquid pumping applications or chemical solvent vapor recovery.

• Pulse the manual vacuum shaker handle to clear surface dust cake every 30 minutes of grinding.
• Remove and inspect pleats for tears or stone puncture holes every 40 operating hours.
• Replace the cartridge element when differential pressure drops airflow below 140 CFM or after 6 months.

Manufacturer Warranty In Box Manifest

Edco covers this genuine replacement filter with a 1-Year manufacturer defect warranty against pleat separation or gasket bonding flaws. The packaged shipping carton contains the genuine ED20091 micro-pleated filter cartridge, pre-installed polyurethane sealing gasket, protective cardboard sleeve, and filter installation instruction guide.