Bissell BigGREEN Commercial Deep Cleaning 2 Motor Carpet Extractor

Description

Heavy foot traffic grinds winter slush and parking lot dirt deep into commercial hotel carpeting. The Bissell BG10 Commercial Carpet Extractor uses 2 motors and a rotating DirtLifter powerbrush to pull 103 CFM and 84in water lift. Its 42 lbs weight requires 2 hands for stair transport between building floors.

The extractor chassis features heavy rotationally molded polyethylene with an adjustable folding handle. One 12A motor powers the high-torque roller brush while a separate 120V 2-stage bypass motor drives vacuum recovery suction. Internal fluid channels resist chemical detergents. Net unboxed weight is 42 lbs. Base dimensions measure 20-1/2in long by 11in wide by 42-1/4in high, rolling on 2 large rear rubber wheels and a front suction shoe.

Key Features of Bissell BG10

Hotel managers and cleaning contractors buy Bissell BG10 extractors to restore soiled commercial carpets without contracting expensive outside cleaning crews. Favorable commercial pricing makes this dual-motor carpet extractor an essential asset for facility maintenance fleets.

• Two independent motors drive the cylindrical powerbrush and high-lift vacuum blower for deep extraction.
• Rotating DirtLifter powerbrush scrubs carpet loops on both forward and backward cleaning passes.
• Two separate 1.75gal tanks keep clean detergent solution isolated from dirty wastewater.
• Powerful suction shoe lifts up to 90% of injected wash water to accelerate carpet drying times.
• Flow indicator gauge spins to confirm detergent solution is flowing to the spray tips.
• Long 25ft commercial power cord provides wide operational range without frequent outlet swaps.
• Optional accessory hose connection permits above-floor cleaning on upholstered chairs and stairs.

Dual Motor Extraction Bench Tests

Laboratory tests verify 84in of static water lift at the floor suction shoe and 103 CFM airflow. Across commercial loop carpet, the machine recovers 90% of dispensed wash water in 2 passes. Running current draws 12A on 120V line power under simultaneous brush scrubbing and vacuum extraction. Sound output checks in at 76 dB under load. Motor exhaust temperatures stabilize at 126°F after 45 minutes of continuous hot water extraction, with internal thermal breakers preventing motor armature coil burnouts.

Extractor Operation Tank Maintenance Protocol

The handle-mounted spray trigger dispenses cleaning solution with light finger pressure during forward strokes. Do not buy this wet carpet extractor for dry concrete dust collection, wood shop sawdust, or drywall sanding because it lacks dry particulate filtration and requires liquid to function.

• Rinse the 1.75gal dirty water tank and clean the lint screen after every cleaning run.
• Flush clean warm water through the solution spray lines after using concentrated carpet shampoos.
• Remove tangled carpet fuzz and threads from the DirtLifter brush roll every 10 service hours.
• Inspect the front clear suction nozzle for sand grit or hair clogs after each carpet shift.

Commercial Warranty Package Manifest Details

Bissell Commercial covers the BG10 extractor with a 1-Year limited warranty on motor components and structural frame parts. The standard shipment carton contains the BG10 carpet extractor, clean water tank, dirty water recovery tank, 25ft heavy commercial power cord, and full operating instructions manual.