Shocker Hitch Impact 14K 2 1/2 Inch Cushion Hitch & Chrome Combo Sway Bar Tab Ball Mount 2 Inch & 2 5/16 Inch Hitch Balls

Description

Operating without air bladders, the Shocker Hitch Impact 14K Cushion uses dual dual-action urethane cushions to absorb heavy tongue shock. This unit fits 2-1/2in class 5 receivers and tows up to 14,000 lbs. Dual sway tabs stabilize tall trailers in crosswinds. The rigid urethane dampeners provide a stiffer ride than pneumatic hitches under light loads.

Formed from solid high-grade structural plate steel, this mechanical cushion hitch handles severe work conditions. A solid 2-1/2in steel shank inserts into class 5 truck receivers without an adapter sleeve. The tool weighs 52 lbs, with outer dimensions spanning 13in length by 9in width by 10in height. Dense urethane compression pucks absorb bidirectional tow forces while resisting oil, deicing salt, and extreme temperature variations.

Key Features of Shocker Hitch SH-125-340C-SC

Contractors buy Shocker Hitch SH-125-340C-SC units for maintenance-free shock isolation on rugged job sites. Review commercial fleet pricing to equip heavy diesel work trucks without checking air bladders.

• Solid 2-1/2in steel shank fits class 5 truck receiver tubes.
• Dual chrome combo ball provides 2in and 2-5/16in towing connections.
• Integrated sway tabs accept friction sway control bars on both sides.
• Dual-action urethane bushings cushion fore and aft towing impacts.
• Mechanical cushion design eliminates air checks and pneumatic leaks.
• Adjustable drop mount provides 4in of vertical drop adjustment.
• Durable textured black powder coat resists rock chips and corrosion.
• High-shear cold-rolled steel pins secure the ball mount channel.

Impact Cushion Bench Dynamic Verification

Mechanical compression testing records a 60 percent drop in forward and rearward towing shock. The urethane pucks maintain elasticity after 250,000 continuous compression cycles under 1,400 lbs tongue loads. Thermal testing from -40°F to 150°F confirms zero brittleness or loss of damping response on rough routes. Lateral sway tab stress testing shows zero yield under 1,600 lbs side force during sudden evasive turns. In-cab noise monitors confirm an 11 dB clatter reduction compared to standard solid steel ball mounts.

Field Handling Inspection Maintenance Protocols

Adjusting the drop height requires pulling 2 steel hitch pins from the channel. Do not purchase this hitch for 2in receiver tubes, small utility vehicles, or light half-ton pickup trucks.

• Inspect the urethane cushions for surface cuts or wear every 60 days.
• Verify ball mount channel pin hole roundness and fit every 6 months.
• Torque combo ball retention nuts to 250 ft-lbs every 90 days.

Factory Warranty Box Manifest Inclusions

Shocker Hitch covers this unit with a 1-Year limited manufacturer warranty against material defects. The box includes the 2-1/2in Impact cushion hitch base, chrome combo ball mount with sway tabs, 2 channel pins with clips, and a printed product instruction manual.