Shocker Hitch HD 20K 2 Inch Air Receiver Hitch & Raised Sway Bar Tab Ball Mount 2 Inch Hitch Balls

Description

Hauling enclosed cargo trailers across blustery open plains tests the Shocker HD 20K Raised Sway Hitch under severe highway winds. Sized for standard 2in receivers, it manages 20,000 lbs pull weight and 2,000 lbs tongue force. The air suspension dampens violent trailer chucking, though checking bladder pressure remains necessary before heavy equipment runs.

Constructed from high-tensile ASTM A572 Grade 50 steel plate, this raised hitch withstands severe dynamic road pounding. Its solid 2in cold-drawn steel shank fits all Class 4 receiver boxes. Net bare weight is 61 lbs with a total length of 14-1/2in. Industrial gloss black powder coating seals the welded chassis against moisture, stone chips, and winter chemicals.

Key Features of Shocker Hitch SH-HD610-200-2SC

Industrial contractors buy Shocker Hitch SH-HD610-200-2SC to stabilize tall commercial haulers on windy interstate routes. Fleets review commercial sway hitch pricing for professional equipment transport.

• Solid 2in square steel shank fits directly into Class 4 receiver tubes.
• Rated for 20,000 lbs trailer pull weight and 2,000 lbs vertical tongue load.
• Raised ball platform levels trailer tongues on low-riding tow vehicles.
• Friction sway bar tab mounts commercial stabilizer arms to stop fishtailing.
• Forged 2in steel hitch ball provides a hard wear surface for commercial couplers.
• Pneumatic shock cell absorbs violent cab bucking on rough highway joints.
• Grade 8 steel pins secure channel height settings under heavy tractive pull.
• Dual shank mounting holes permit adjustable bumper step depth clearance.

Laboratory Dynamometer Performance Ratings

Stress tests indicate a 68 percent reduction in peak frame shock transmission during rapid highway stops. The solid 2in steel bar exhibits zero deflection under 25,000 lbs of cyclic draft force. Working air bag pressure ranges between 20 PSI empty and 95 PSI under full 2,000 lbs tongue weight, preventing bottom-out metal contact.

Hookup Ergonomics Restrictions Maintenance Routine

Connecting the friction sway bar takes seconds using the dedicated side tab mount. Height shifts require pulling the retention pins and realigning the platform holes. Never couple this unit to weight-distribution systems or exceed the stated 20,000 lbs capacity.

• Grease the central brass pivot sleeve using NLGI 2 grease every 30 days.
• Check air pressure with an accurate gauge every 14 days.
• Torque the 2in ball mounting nut to 250 ft-lbs every 90 days.

Warranty Statement Package Contents Roster

Shocker Hitch backs this product with a standard 1-Year factory warranty against material and weld defects. The package ships containing the HD 20K 2in air chassis, raised ball mount with welded sway tab, 2in hitch ball, two mounting pins, cotter clips, and installation literature.