Shocker Hitch 20K Impact Max 2 Inch Cushion Hitch & Raised Sway Bar Tab Ball Mount 2 Inch Hitch Balls

Description

Navigating uneven bridge joints and gusty crosswinds strains truck hitches when towing heavy enclosed trailers. The Shocker Hitch 20K Impact Max cushion hitch stabilizes trailer drift with welded sway tabs while absorbing road shock. Rated for 20,000 lbs, it fits 2in receivers. The mechanical urethane cushions produce a stiffer ride than air hitches under empty trailers.

Solid structural steel plate uprights enclose dual internal urethane compression pucks within a rigid welded housing. The solid 2in square steel shank inserts into class 4 truck receivers without an adapter sleeve. Hitch bare weight totals 56 lbs, with dimensions spanning 13in length by 10in width by 11in height. Twin cold-rolled steel pivot pins support the raised ball mount, handling 2,000 lbs vertical tongue load without metal distortion.

Key Features of Shocker Hitch SH-C100-310-2SC

Commercial contractors and equipment haulers buy Shocker Hitch SH-C100-310-2SC units for maintenance-free shock isolation on rugged highways. Check commercial fleet pricing to outfit heavy work trucks without checking air bladders.

• Solid 2in square steel shank fits class 4 truck hitch receivers.
• Raised ball mount bracket provides 1in to 3-1/2in rise for level trailer towing.
• Machined 2in hitch ball handles 10,000 lbs gross pull capacity.
• Integrated sway tabs accept friction sway control bars on both sides.
• Dual-action urethane bushings cushion fore and aft towing impacts.
• Mechanical cushion design eliminates air checks and pneumatic leaks.
• Textured black powder coat finish resists rock chips and corrosion.
• High-shear cold-rolled steel pins secure the ball mount channel.

Mechanical Cushion Dynamic Impact Benchmarks

Mechanical compression tests record a 62 percent drop in forward and rearward towing shock across broken pavement. The heavy urethane pucks maintain elasticity after 250,000 continuous compression cycles under 1,800 lbs tongue loads. Thermal testing from -40°F to 150°F confirms zero brittleness or loss of damping response on winter routes. Lateral sway tab stress testing shows zero yield under 1,600 lbs side force during evasive turns. In-cab noise monitors confirm a 12 dB clatter reduction compared to rigid hitches.

Field Setup Scheduled Maintenance Steps

Adjusting the raised mount height requires pulling 2 steel channel pins by hand. Do not purchase this hitch for 2-1/2in receiver tubes without an approved steel adapter, or for small passenger utility vehicles.

• Inspect the urethane cushions for surface cuts every 60 days.
• Verify ball mount channel pin hole roundness every 6 months.
• Torque the 2in hitch ball retention nut to 250 ft-lbs every 90 days.

Factory Warranty Standard Package Details

Shocker Hitch covers this mechanical cushion hitch with a 1-Year limited manufacturer warranty against material defects. The package includes the 2in Impact Max cushion hitch base, raised ball mount with sway tabs, 2in hitch ball, 2 channel pins with clips, and a printed installation manual.